Next Re-Pop in Progress....

[DKWRACER]

I acquired a NOS 80/81 rear MX fender with the integrated numberplate,(M Roberts) it should be here in a few days...If the quality is good enough, this one might be worthy of reproducing, what do you think guys?.....Ok, so I'm sic........

[OUCWBOY]

I would call it more like being creative.

Donny Smith

[DKWRACER]

Pentons West, I like "that one" denotes a sertain quality about it....typo intended, pun intended, we talked about this..

Cha...Tom.....

[vmx1963]

Absolutely!  Those things are as hard to find as rocking horse crap!  I'd be having one as soon as I find a MC 80.

VMX1963
Western Australia
VMX KTM

[Bill Campbell]

Guys,
     Check out the following web page to see some fibreglass reproductions. The only problem is they are made in Australia.
http://home.iprimus.com.au/hyrockpk/Gallery_Brad.htm

[tomale]

I had wondered about the bikes with the number plate on the back fender but never did figure out what year that was. I can remember seeing them in the Mag's. I had just moved from Calif. to Seattle to start school and i had picked up a new mag and saw the ...Then new bikes and remembering thinking it looked a bit like the OSSA phantom. At least it got the plate where you could see it... so was that 79 or 80 that the bike came like that?
Is the 78 still considered a MC5 ? or just a MC and then what ever size bike it is Ie MC400 ?
 dazed and a bit confused in seattle.
Must be the drizzle instead of the sunshine they said we were suppose to have.

Thom Green,I own and ride a 76 250 MC5 MX which I bought new.

[Kip Kern]

I am confused (which is normal) who is reproducing the left side airbox covers for the CMF bikes 72-75?  Are they Glas or plastic?  Thanks!

[DKWRACER]

Kip, I have fiberglass LH panels for these years, can been seen under "suppliers" @ the start of our home page, I am at the bottom....
Tom........

[DKWRACER]

I did recieve the NOS fender, all the way from Canada, it looks good, what remains to be seen is how much fenders from down under would cost, even with the exchange rate in our favour, I have sent an email to our friend in "vegamite" land, as to this very subject, I will try to keep costs down...And I might even pursue the MX side panels too!!!

Why,you may ask, consider this, one of our other Poggers(USA) is working on the N-duro fender...This would "complete" the cycle of parts for this fabulous motorcycle.....besides, I plan on being around for a very long time and someone will inherit all my molds...

[Kip Kern]

Thanks Tom!