WANTED1980 175 GS Clutch

[G Ellis]

Wanted clutch plates metal and fibers, for a 1980 175 motor. Hope someone can help. Do not have the part numbers, they are different than a 77 175 motor. If someone has the part numbers would like to have them. This motor has a aluminun clutch basket. Any help would be appreiciated. Thanks Gary Ellis

[DKWRACER]

Gary, I think I have a complete clutch for 80/250, will ck, Tom.....

[DKWRACER]

Gary, just missed your call, here is what I have from 250: 7 sintered plates, 10 steel plates, 1 inner basket, outer is missing some teeth, have the flat thrust bearing and two washers, no outer plate or springs n baskets, don't know if will work on a 175...Tom...

[DKWRACER]

Gary, looks like my pack is for an 82, sintered are 2.0mm, steel are 1.4mm... OD of the basket big ring gear is 5.50 inches, off for a putt....Tom...

[pketchum]

1980 KTM 175

metal   1.5mm   6ea  520 32 009 000
fiber   2.75mm  6ea  510 32 012 000

The fibers from a 1980 KTM 250 are the same thickness/part number.  However, the metals from a 175 are 1.5mm and a 250 is 1.4mm and the part number is different.  Sure hope this helps you Gary.


Phil