Airbox question

[Jim A]

The threaded piece that holds the screw for the left side panel in the upper forward part of my airbox has pulled out. What is a good way to secure this back on the airbox? Will regular epoxy glue work or is there another product? Thanks in advance for any suggestions.
     Jim

Jim A

[Ron]

Hi Jim,

I would try to use fiberglass resin if possible.
Epoxy will most likey hold it, my only concern is bonding the two materials.
McMaster-Carr (//www.McMaster.com) sells a Fiberglass Repair Kit #7597a34 for about $10.00. Comes with a small piece of fiberglass and a 2-part resin.

Good Luck, RonW