70 Steel Tanker

[fosterboy]

Hello folks are the cylinder fins cut on the right hand side for pipe clearence on a 70's Steel Tanker like they are on a Sachs or DKW? Anybody have any clseup pictures? thanks Ed

69 Penton 125         75 Honda MR175        76 Hercules gs175      72-73 Penton prjcts

[t20sl]

Yes they are cut.  My 70 has the bottom 3 fins cut starting at the front corner about half way into the the front corner radius and goes to rear.  The rear is cut in about 1 3/8" roughly.  I believe the DKW and Sachs are the same but not sure.  If needed I can provide a template as my exhaust is off the bike currently.  Sorry, my camera is at work. Ted

[checkcrew]

Ed, i have my 71 Steel tanker and my 70 Sachs/DKW sitting side by side on display, they are the same, Ted is correct on the measurements, hope this helps, regards, Mike G.

Mike Gallagher, Camden County, NJ. - 70 + 71, 125 Steel Tankers, 72 x 2, 73 x 2, 125-6 Day's, 73 Jackpiner, 75 - 250 H/S, 74 1/2 Mint 400

[fosterboy]

Yes it did thanks for the help.Ed

69 Penton 125         75 Honda MR175        76 Hercules gs175      72-73 Penton prjcts