Penton/KTM parts for sale

[Big Mac]

> Double-sided 14mm '73-'77 KTM shift shaft and shift quadrant. *SOLD* From a '73 motor, shaft protrudes through knockout on motor rt. side behind sprocket, for right shifting option, ie: flattrack. Good splines. $35
> Alloy 20" long seat base *SOLD* and rough foam, rough hardware. Very good cond. base, needs glue clean-up, still has the edge welting for cover protection. Came on '75 250 and has '75-style hardware, but fits both '74-'75 Harescrambler and MC5 frames and attachment points. Foam is 4-3/4" hi at front, 6" at rear (long, tall?), has some divots, flaking, a split, but could be used if fixed up and you're not real picky. Hardware solid but rusty. $95
> Double-leading shoe front brake *DIBS CALLED* backing plate and shoes, '84 KTM. Adapt to your Evolution-class MC5 or 420/495 and stop like a Yamaha. $40
> CEV headlight brackets *SOLD* for 35mm forks. $25
> MC5 seat hardware, good cond., needs paint. $15
> Airboots, new repops, 50mm x 70mm openings x 70-72mm long; one offset *SOLD* ; one straight reduction--'76-'79 250/400s? Have part #'s I can send. $20 each.

Can send pics, please e-mail with questions or to call dibs. Can take Paypal, will ship. Thanks,
[email protected]



Jon McLean
Lake Grove, OR

[454MRW]

Jon,
If no one has stepped up, put me down for the double sided shifter shaft for my KRP project. I had forgotten who had one......my bad. Are you going to the POG metting next Saturday? Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S

[Steve Minor]

Jon.....I need one of the air boots for my 77 400 GS6 if it will fit. Would you please send me a part number of the ones you've got? A picture would be great if possible.


"Airboots, new repops, 50mm x 70mm openings x 70-72mm long, one offset, one straight reduction--'76-'79 250/400s? Have part #'s I can send. $20 each."

Thanks


Steve Minor
Wilmington, NC

[checkcrew]

Jon, hi, i will take the 35mm headlight ears if they are not spoken for, let me know, thank you, Mike G. from NJ.

Mike Gallagher, Camden County, NJ. - 70 + 71, 125 Steel Tankers, 72 x 2, 73 x 2, 125-6 Day's, 73 Jackpiner, 75 - 250 H/S, 74 1/2 Mint 400

[Big Mac]

Mike W.- Sent you an e-mail. Shift shaft set aside for you. No POG meeting for me...it's like 2200 miles away from me and I'd be late to work on Monday, even if I drove fast.

Steve- Sent you an e-mail, the offset should fit, will send a pic if you'll send your e-address. Holding it for you.


Mike G- Gary Ellis made an early a.m. dibs call on the headlight ears. If he changes his mind, will let you know.

Thanks guys,


Jon McLean
Lake Grove, OR

[Steve Minor]

Jon...I got your email and replied...thanks. Looks like you've got what I need.

Steve Minor
Wilmington, NC

[checkcrew]

Jon, hi, i will take the 35mm headlight ears if they are not spoken for, let me know, thank you, Mike G. from NJ.

Mike Gallagher, Camden County, NJ. - 70 + 71, 125 Steel Tankers, 72 x 2, 73 x 2, 125-6 Day's, 73 Jackpiner, 75 - 250 H/S, 74 1/2 Mint 400

[Big Mac]

Mike W.- Sent you an e-mail. Shift shaft set aside for you. No POG meeting for me...it's like 2200 miles away from me and I'd be late to work on Monday, even if I drove fast.

Steve- Sent you an e-mail, the offset should fit, will send a pic if you'll send your e-address. Holding it for you.


Mike G- Gary Ellis made an early a.m. dibs call on the headlight ears. If he changes his mind, will let you know.

Thanks guys,


Jon McLean
Lake Grove, OR

[Steve Minor]

Jon...I got your email and replied...thanks. Looks like you've got what I need.

Steve Minor
Wilmington, NC

[G Ellis]

Jon was wanting to know if you have shipped the headlight ears? Email me at [email protected]  Later Gary