Steel tanker rear exhaust bracket needed

[clayman]

I have just completed assembling my 1971 Penton 125 steel tanker and cannot find the rear exhaust bracket. We tried to fabricate one but the material is too thin and will quickly crack from vibration. Are the stock brackets available anywhere, or does someone have a spare? We will probably go to the hardware store for a temporary, but would love to have another original.

Thanks,

Clay

[checkcrew]

Clay, hi, check out {parmabike} Ebay handle, has many repo parts for the Steel's, all very good quality, hope this helps, regards, Mike G.

Mike Gallagher, Camden County, NJ.- 69 + 71, 125 Steel Tankers, 72 Berkshire, 72 x 2, 73 x 2, 125-6 Day's, 74-6 Day, 73 Jackpiner, 74 1/2 - 250 H/S, 75 - 250 H/S, 74 1/2 Mint 400

[clayman]

Hi Mike, thanks for the info. I did check Roberto's website and didn't see anything, but also emailed him directly. I should have been more careful when I got rid of my DKW chassis. I think the bracket accidently went with those parts!:(

[clayman]

Mike,

Roberto says he's out of the exhaust brackets at this time but should have some at a later date. Fortunately, Don Roth has a spare and is kind enough to send it my way. Thanks Don!

Clay