Plastics for 1981 GS model

Started by wfopete, August 19, 2011, 03:04:47 PM

Previous topic - Next topic

wfopete

I looked through our suppliers but didn't see anyone offering plastic for 1981 GS models.  Does anyone have a recomendation for other sources of the 1981 GS model year plastic?

Pete Petrick
175 Jackpiner
Slow but Good
Pete Petrick
175 Jackpiner
Slow but Good

Mike Hufnagel

DC plastics would be my guess.

74 Yamaha TY 250
75 Jackpiner w/ 250 eng.
82 KTM GS250II (import)
82 KTM 495 (2)
98 KTM 300mxc
00 KTM Duke 2
06 KTM 950 Adv.
08 Suzuki DR70Z
\\\'12 Husaberg TE300
74 Penton Wassels
74 Yamaha TY 250
77 Yamaha TY 175
74 Jackpiner w/ 250 eng.
82 KTM GS250II (import)
77 Yamaha RD 400 Daytona Café replica
81 Ktm mx 495
12 Ktm RC8R
04 Honda xr 100
06 KTM 950 Adv.

wfopete

Mike  

Did a search for DC plastics and bingo!  Thanks.

Pete Petrick
175 Jackpiner
Slow but Good
Pete Petrick
175 Jackpiner
Slow but Good

Mike Hufnagel

I'll be paying them a visit in the winter. Have 2 495's i want to do. I'm not crazy about there plastic but they have fast shipping and seem to care.

74 Yamaha TY 250
75 Jackpiner w/ 250 eng.
82 KTM GS250II (import)
82 KTM 495 (2)
98 KTM 300mxc
00 KTM Duke 2
06 KTM 950 Adv.
08 Suzuki DR70Z
\\\'12 Husaberg TE300
74 Penton Wassels
74 Yamaha TY 250
77 Yamaha TY 175
74 Jackpiner w/ 250 eng.
82 KTM GS250II (import)
77 Yamaha RD 400 Daytona Café replica
81 Ktm mx 495
12 Ktm RC8R
04 Honda xr 100
06 KTM 950 Adv.

wfopete

What's the problem with thier plastic?  Is it a poor knock off of the OEM (like Maier)?

Pete Petrick
175 Jackpiner
Slow but Good
Pete Petrick
175 Jackpiner
Slow but Good

adrian_goold

Try KTM Klassiker, they have some UFO Plastics for side covers and front gaurds. Rear gaurd i am still using DC Plastic.

Here is my bike ready for vinduro next week. Note i am using the MX rear gaurd as i mainly ride this bike in vintage MX.




Regards,
Adrian Goold #101
http://www.ozktm.com

'73 175 Rebuilt.
'74 400 Now Racing!
'78 250 running soon!
'81 250 Now Racing!
'81 495 Engine Work stage.
'84 125 Now racing!
'07 300
Regards,
Adrian Goold #101

Mike Hufnagel

The plastic may have to be modified a bit. It may not be exactly factory, like it was for my IT200 (the rear fender & the headlight shell) I have used them on my 75 Piner with no problem at all.  BUT if you use them make sure you wipe them down with something like acetone as they coat them with ArmorAll and stivkers or backgorunds wont stick.     I like to use them as "race plastic" & stash the original plastic.

74 Yamaha TY 250
75 Jackpiner w/ 250 eng.
82 KTM GS250II (import)
82 KTM 495 (2)
98 KTM 300mxc
00 KTM Duke 2
06 KTM 950 Adv.
08 Suzuki DR70Z
\\\'12 Husaberg TE300
74 Penton Wassels
74 Yamaha TY 250
77 Yamaha TY 175
74 Jackpiner w/ 250 eng.
82 KTM GS250II (import)
77 Yamaha RD 400 Daytona Café replica
81 Ktm mx 495
12 Ktm RC8R
04 Honda xr 100
06 KTM 950 Adv.

dirtbike