Sachs cases

Started by OUCWBOY, October 12, 2011, 04:10:05 PM

Previous topic - Next topic

Guenther68

Hi Donny,

doe you need a 5 or 6-speed case?

Best regards
Guenther Vogt,
Hercules Club, Germany



******************************
Hercules-Interessengemeinschaft e.V.
URL: http://www.herculesig.de

******************************
Best regards
Guenther Vogt,
Hercules Club, Germany



******************************
Hercules-Interessengemeinschaft e.V.
URL: http://www.herculesig.de

******************************

OUCWBOY

Hello Guenther my friend!

I need 6 speed cases, but could get by with a set of 5 speed.
I think I have enough parts to build either one.

Thanks



Donny Smith
Paragould, AR
Donny Smith
Paragould, AR

Gavin Housh

I thought you could use either transmission in either large crank or small crank case. Aren't the mainshaft and layshaft the same length for five and six speed systems? Sachs just made the gears thinner, and changed the number of slots in the mainshaft for engagement of the selector key for the six speed. I would assume that the "stuffed cases" only will take the small crank and that you can put either trans in those cases. Please correct me if I'm wrong here.

Richard

I've used the five speed transmission in a set of 125 1/6B cases.