WTB Handlebars for 72 Six Day

[KJDonovan]

I am looking for a good (not bent, decent chrome) set of handlebars for a 72 Six Day with 32MM Ceriani forks.  If anyone has a set collecting dust and can part with them send me an email: [email protected]

Thanks,

KD

[454MRW]

Parmabike sells new acurate reproduction ones made in Italy on eBay. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

[KJDonovan]

Mike,

Thanks for the lead, do you know if they have a web site?  I can't seem to located them doing a search.

Thanks,

KD

[Tom Murphy]

I believe his store name is Vintage Moto Parts.  Tom

[454MRW]

Here is a link to one of his listings. Mike
http://www.ebay.com/itm/1971-73-Penton-KTM-HANDLEBAR-Sachs-GS-MX-Maico-bar-Jawa-/350460173690?pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item51990ddd7a

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

[DougDyar]

Here's another ad for chrome vintage bars:

http://www.ebay.com/itm/Chrome-Vintage-Handlebar-Maico-AHRMA-VMX-AMA-Bultaco-CZ-Husky-Penton-Elsinore-/110784333973?pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item19cb42c895

Anyone know if these would be correct?

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

[KJDonovan]

Guys,

Thanks for the leads on the handlebars.  Just ordered the $42 pair.  I'll let you know how they look when the come in.

Thanks,

KD

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Yamaha AT1 (Project)
73 Yamaha AT3 (Project)

[checkcrew]

Kevin,

i have a set of those $42 bars, they are like a set of flat track bars with a cross-bar,
"IMO" if you cut about 2" off each side they are not too bad, the pull back is very much like stock Yamaha AT1 bars,

the bars that Parmabike sells are an exact copy of the "OE" bars,

hope this helps,

regards,

Mike Gallagher, NJ.
[email protected]

[KJDonovan]

Mike,

Thanks for the heads up, the bars are for a bike I am pulling back together for a guy,  the ones he had must have Schwinn stamped on them somewhere, so anything will be an improvement.  

KD

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Yamaha AT1 (Project)
73 Yamaha AT3 (Project)

[checkcrew]

Kevin,

they will work then, just cut them back some, if not they will be hitting his knees :-))))

add a few pics when you get the 6-Day together, we all like eye candy !!!

regards,

Mike Gallagher, NJ.
[email protected]

[gooddirt]

Hey  support the Euro and the West! Please  keep China products off of  all Pentons ! Tires are ok:D:)

[Dale Fisher]

I have purchased both in the past.  The inexpensive bars are a close resemblance to the original that was on my Jackpiner with a litte more pull back.  It is obvious that with these inexpensive bars most of the savings is in the "chrome" finish.  The Parmabike bars as well as many of his other repo items are expensive but top quality.  Like, shocks, tires, and other items, the intended use and your budget influence the desired outcome.

Dale Fisher
POG Membership
74 Berkshire 100
70 Six-Days 125
72 Jackpiner 175

[Kip Kern]

Speed and Sport, around $50

[Dale Fisher]

I can also speak from experience on the MX bars from Speed n Sport.  Very nice bars at an affordable price.

Dale Fisher
POG Membership
74 Berkshire 100
70 Six-Days 125
72 Jackpiner 175

[gooddirt]

The China bar [8]  are more or less a CZ bend Bar . Speed and Sport a good choice.