Motoplat Wiring Jacket

[Keith Meatyard]

Do any of you detailed restorers know if there is a place to readily obtain the black vinyl tubing that covers the wires between the stator and coil?  Everything I checked at auto parts and building supplies has been way too thick walled.  The original stuff is thin like a soda straw and about .400" O.D.

Keith Meatyard

[Dale Fisher]

Meat,
This link was from a previous post on the topic.  Look in sleeves to see if something is applicable.

http://www.vintageconnections.com/

Dale Fisher
POG Membership
74 Berkshire 100
70 Six-Days 125
72 Jackpiner 175

[454MRW]

Any idea on what size is needed? I am away from home and would like to route an additional baseplate ground wire in the loom for a bike I am working on presently for a friend and would like to get some ordered. Thanks, Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

[BrianTaylor]

3M makes a line of shrinkable vinyle tubing ... comes in 3 ft length various sizes.... you can use without shrinking the tubing ....BT

Brian Taylor

[Keith Meatyard]

Dale, you da man!!  I just ordered from the site.  Their product in the 11 mm size is just like the original tubing covering the wires between stator and coil.

quote:Originally posted by Dale Fisher

Meat,
This link was from a previous post on the topic.  Look in sleeves to see if something is applicable.

http://www.vintageconnections.com/


Dale Fisher
POG Membership
74 Berkshire 100
70 Six-Days 125
72 Jackpiner 175

Keith Meatyard

[454MRW]

Me too, thanks! Mike
**Update, Order received today, 1-9-12 very good shipping!
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R