Need 74 1/2 250 pipe

[derek martin]

I put the hurt on the front of my enduro pipe at the Arkansas AHRMA event - vee'd in and deformed in a large way. The back half is in really nice shape - if anybody has an entire pipe or a pipe with a good front half they' d be willing to sell please advise.

[Richard Terry]

PM sent

[Daniel P. McEntee]

I have a pipe from a '73 250 that was heavily modified at the back end but is original from the first cone forward. Don't know if the curve is correct for your bike. If you have no luck elsewhere, let me know and I'll see if I can figure that out on my end. I had Mike Winter post a picture of the pipe for me on a thread late last year. Do a search on my name and I'm sure it will come up, and you can check out the photo.
   Thanks a lot,
   Dan McEntee

[454MRW]

Richard,
PM on the site doesn't work according to Karen a while back, and when I tried it. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

[Richard Terry]

Thanks Mike.

I have a '74.5 enduro pipe I just removed when I put an Ace on mine. I don't know what it's worth so you could make an offer. My e-mail is [email protected].

[derek martin]

Thanks to all responders.
Dan - that looks a like it might be a 400 header pipe with a custom cone rear section; not 100% sure. I'd like to stay with a 250 header pipe as I'm afraid a 400 would make it "peakier".
Richard - email sent in response

[derek martin]

Pipe dilemma solved thanks to Richard Terry.