Painting a Steel Tanker Tank

Started by tofriedel, December 28, 2013, 09:58:45 AM

Previous topic - Next topic

tofriedel

I am looking for a painter that can do the paint on a 125 ST gas tank for a restoration.

I have seen some restored tanks that use tape instead of pin stripping, while they look decent it is not as good as pin stripping.

Who would you recommend to do the restoration?

Email me at tonyfriedel@aol.com.

Thank you for any recommendation.

Tony
Tony

Kip Kern

Personally, I would pinstripe, it isn't that much and looks original, just make sure the striping is correct.  I have seen tanks painted beautiful then the striping is incorrect and that throws off the whole tank.  The black stripe goes completely around the seperation between the white panel and the green.  The white stripe has a 1-2" void in the stripe at the bottom of the tank close to the knee area. Stripes are roughly 1/16" but can vary as the brush stroke does when turning corners.  Paint the tank first, white knee, then green color, then apply decals, then Clear lightly then stripe.  Looks original!  Tape sucks and the only Penton that had it originally was the Woodsman Trials (Orange Panels), it looked crappy but it was original.  CIAO

gooddirt




       Rick Tipton did this tank  $300 to $400; did a flare of extra pin,contact AMSracing for #



clayman

LG,

Is this the $$$$$ Bill Cappel steel tanker? How's  everything going?
Clay

gooddirt