Mount Bethel PA

[Daniel P. McEntee]

Hey Dale;
  Go to the phot gallery and the same section that has Paul's bike. He has a link in his reply. Check out the photos there. The pivot bolts go through the foot peg mount tubes. The only thing I don't have yet is the bracket for the return spring. There was a thread about this at one time not long ago. I think Paul said he did something a little different than normal. I need to review that myself.
   Type at you later,
   Dan McEntee

[Dale Sonnenschein]

Hey Dan, I did see that pic but it's hard to see exactly how it mounted.
PS. the husky is doing great!

73 Jackpiner
73 Husky 360 WR/RT
76 Husky WR360
78 husky cr250
10 ktm 250xc
02 bmw r1150r

[KJDonovan]

Dan,

I did a 75 400 a while back with a center stand I got from Jake.  I welded a tab on the swingarm tube to attach the return spring to.

Thanks,

Kevin

[Daniel P. McEntee]

http://www.pentonusa.org/GalleryServerPro/default.aspx?moid=3188&hr=1
http://www.pentonusa.org/GalleryServerPro/default.aspx?moid=3188&hr=1
  This is the picture that made it clear to me. You can see the right foot peg mount and how the stand pivots around the boltthat goes throgh the tube. The spring bracket has that square lookin zigzag bend t clear a bolt head. It curves around underneath the brake arm pivot. That may be what Paul did different from a standard Hi-Point installation, I can't remember. I just wish I had the spare time right now to work on mine since we started talking about it!
  Glad you like the Husky! My nephew misses it! If the petcock ever starts to leaking, switch it out to a Penton unit. I made the seal in that petcock, but seem to have lost the touch! I had been having troubles with my '79 250WR and finally resorted to installing one that I got from Al B. That reminds me that I need to replace that in my stash!
  Type at you later,
    Dan McEntee

[Paul Danik]

Dale,

   The mounting bolts do go thru the foot peg mounts. I have my 74 ISDT machine sitting here to look at, the bolts go in from the outside, need to remove the footpeg to install the bolt, pretty sure it has an allen head.

Hope this helps.

Paul

[Dale Sonnenschein]

Thanks Paul, Were those center stands available for sale to the public?
Or were they factory bikes only?

73 Jackpiner
73 Husky 360 WR/RT
76 Husky WR360
78 husky cr250
10 ktm 250xc
02 bmw r1150r