Craigslist 250 in Valparaiso/Bloomington IN

Started by Jason Rowland, September 12, 2016, 11:30:21 AM

Previous topic - Next topic

Jason Rowland


454MRW

It appears to be a complete 77 Penton GS-6 250 for $2,000. I am approximately 220 miles from Valparaiso and could pick up and store or arrange for later delivery if needed for cost of travel. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1978-1979 MX-6 175 & 250 KTM's
1976-78 125-400 RM's & 79 PE250 Suzuki & 2012 DR650
2007 CR125R Honda
1977 MC250 Maico
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1976 Penton MC5 400
1977 KTM MC5 125
1978 KTM 78 GS6 250
L78-79 MX6 175-250 KTM\\\'s
1976-78 125-400 RM\\\'s
2007 CR125R Honda
1977 MC250 Maico
2017 KTM Freeride 250R

Kip Kern

Didn't see the post but I'm about 1 hour or so from there


Don Roth

Also according to owner's wife runs and has title.
-don


skiracer

Is that a GS or a MC with a rear loop on it?  It has the small ignition cover, looks like a MC rear fender, and the exhaust looks like a MC too....  Thoughts, comments?????

1976 MC 5 Original Owner
1982 Suzuki PE 175
1976 Penton 175 XC
1985 20' Hi Point trailer
1976 250 MC5 Original Owner
1976 Penton 175 XC
1977 250 GS6
@flyracingusa

454MRW

77 GS-6 built in rear frame loop, turtle back frame, non original fenders etc. I believe the full ignition covers were last used around 1975 or so. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1978-1979 MX-6 175 & 250 KTM's
1976-78 125-400 RM's & 79 PE250 Suzuki & 2012 DR650
2007 CR125R Honda
1977 MC250 Maico
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1976 Penton MC5 400
1977 KTM MC5 125
1978 KTM 78 GS6 250
L78-79 MX6 175-250 KTM\\\'s
1976-78 125-400 RM\\\'s
2007 CR125R Honda
1977 MC250 Maico
2017 KTM Freeride 250R

Kip Kern

Talked to Eddie last night about this bike, nice machine and would be an easy restore for a nice rider.  I would jump on it but have too many projects right now.  Passed it on to some friends out west.

skiracer

Thanks Mike!  Your knowledge is greatly appreciated!
Quotequote:Originally posted by 454MRW

77 GS-6 built in rear frame loop, turtle back frame, non original fenders etc. I believe the full ignition covers were last used around 1975 or so. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1978-1979 MX-6 175 & 250 KTM's
1976-78 125-400 RM's & 79 PE250 Suzuki & 2012 DR650
2007 CR125R Honda
1977 MC250 Maico


1976 MC 5 Original Owner
1982 Suzuki PE 175
1976 Penton 175 XC
1985 20' Hi Point trailer
1976 250 MC5 Original Owner
1976 Penton 175 XC
1977 250 GS6
@flyracingusa