Penton 400 Cyl head modification Jerry Birky

[454MRW]

Is it possible to still have the 400 head modification done? I'm not sure of the current status, but I figured while I have the pipe off, and I'm working on the carburetor, I should have it done.
I guess I should have clarified this to ask is there any way of contacting Penton Racing Products, are they still operating? There is no contact information on their site that I see. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1978-1979 MX-6 175 & 250 KTM's
1976-78 125-400 RM's & 79 PE250 Suzuki & 2012 DR650
2007 CR125R Honda
1977 MC250 Maico

[Daniel P. McEntee]

Hey Mike;
   Just sent you an email. Let me know what you find out.
   Type at you later,
   Dan McEntee

[Larry Perkins]

It is my understanding that Penton Racing Products has closed the doors.

Larry P

[454MRW]

I thought I read something about that, but all I can find is where they were dropping the ignition parts and service. I wonder where the tool bit is, and if it could be sold or passed on to someone capable of doing the modification? Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1978-1979 MX-6 175 & 250 KTM's
1976-78 125-400 RM's & 79 PE250 Suzuki & 2012 DR650
2007 CR125R Honda
1977 MC250 Maico

[metalkfab]

RE-MX purchased Penton Racing Products from Jack Penton. Dan Gray purchased the assets.Not sure if he does additional machine work.We did ship our blanks to a machine shop in Amherst,Ohio.