Good Stuff For Sale

[Mike Lenz]

Projects are maturing...as am I, ahhh. So got some stuff I shouldnt be hording. You hear that other co poggers?  Dont horde what you are not going to utilize! Time to let go of:

1973 250 mx tank, side panels and airbox $350.
1974 175 mx tank and NOS blue petty fenders $350.
1975 250 enduro tank $200.
1975-76 orange mellon windsor tank w petcocks new $100.
1976 orange Lg GS-6 windsor tank w petcocks new $100.
1972-76 airbox cover fiberglass primered $30.
1974-75 green/yellow fiberglass side panels restored $150
(This green is not oem green. Its the 1997 125 special edition green. was going to have a tank done the same. Pretty green!)
1974-75 250 red/white fiberglass side panels restored $150
1974-75 white 250/400 exhaust plastic side panel $35.
1975 red/yellow nos/oem laydown shock airbox cover (has chip out of corner and spots on numberplate area. could be restored. $100.
1976-77 mc-5 side panels white translucient has stain $20.
1978 DC plastics mc-5 side panels $50.
new 60 tooth 428 rear spk for full width wheel $50.
1981 38mm Marz fork tubes 750mm long straight $100.
(the 81 KTM MC's were too tall and most came with 780mm tubes.  I was going to use these, in conjunction with 1/2 inch shorter shocks to /lower my 81 495 for better handling...without losing any fork travel. 78-80 ktm tubes are 720mm, wont work.)
Wiseco 404 80 over (56mm) piston 1976-79 125 $60.
Mahle 54.75mm Sachs piston 1971-75 125 $90.
Mahle 400 pistons 81.75, 82, 82.25, 82.5, 83mm $125.
Rings Mahle and Wiseco 63.75, 64.5, 72, 81, 81.25, 81.5, 82, 82.25, 82.5 (the later 390 KTM used 82-83mm pistons that work in -the older 400's. I got em from Europe. Some are single ring)

Text 309-231-6477 for picts. If you think Im too high and no one else will offer full price...make me an offer. If I sell the 73 250 airbox I will need another 72-73 one of any color. Also looking for Sachs ign cover. 1973 Magnesium full width rear wheel and sprocket carrier. 1979-82 125/175 rear wheel/b plate. 1980 38mm forks. 1980-81 125 motor/L end. 1981 250 whole bike or parts. 1981 mx tank almost any condition. 1982-83 495 whole bike or parts. Trade?

[skiracer]

Mike, email sent.

1976 250 MC5 Original Owner
1976 Penton 175 XC

[Carl Hill]

I have an 81 250. Thinking about converting it from MX trim back to GS. If I decide to let the small tank go I will let you know.

[Mike Lenz]

Thanks Carl! If you do, and your bike has the 780mm fork tubes you should get those 750mm tubes from me. Lower that thing by an inch or so and you wont believe how much better it will handle.

[Carl Hill]

The forks on my bike were in bad shape when I got it. Ended up using tubes that were slightly shorter. Sounds like I ended up with the hot setup by accident!