How much fork oil do I need?

Started by penton117, February 21, 2001, 12:25:08 PM

Previous topic - Next topic

penton117

Does anyone remember how much oil is required for 32mm Cerianis? Thanks . . .

DKWRACER

Try 200cc ea. leg, or a better way is to remove the springs and add oil (180cc) then compress the legs up/down a few times, wait for the oil to settle, then compress the leg upwards and using a ruler measure the oil level with the top of the leg, it should be close to 6 inches etc...Good Luck!!!

 
Thomas Brosius

Doug Wilford

135cc is the amount you should use.  To much oil will shorten your travel.


 

Chris Brown

Confirming Doug's 135cc. Well, he otta' know.

That's what the factory manual says....

I just did mine; flushed 'em out, two seals in each leg and 135cc of 15w fork oil.
The keeper screw was a real b__tch! I sharpened the blade-end of a lug wrench left over from a volvo I sold and used it to hold the plunger from the inside. Took me an hour to dream up something up that would work.

Chris