1975 Penton 250cc parts needed

[penton117]

Hi fellow poggers
Apparently I never learn my lesson, as I am once again building another bike. Starting with little more than a frame and motor is like trying to reserect a cow from a pound of hamburger! So now I need to find some useable wheels,complete with brakes, sprocket, etc. conical hub rear and standard front. I just need something useable as I am building a racer not a trailer queen. I also could use help finding an exhaust pipe for the same bike. Thanks in advance.

[Tom Gougeon]

I've got front and rear wheels for a '75 250. The rear is straight and true, a few spokes have a little rust, but it's in good shape, comes with a used but usable 48 tooth aluminum sprocket, axle, adjusters brake plate, but no bearings. The front has 1/4" side wobble and a small flat spot, but no cracks. It comes with a brake plate and speedo drive. I also have a brake stay/chain guide in good shape. Drop me a line at [email protected] if you're interested.