Parts Needed for Penton 250

[Monty1163]

My son and I are working on a vintage bike and are needing some parts below are the parts needed and the part numbers Taken from the Original Manual that came with the bike (manual # 9-76)

Penton 250  Serial # 550 03326  Previous owner believed to be a 1978 model? (Clarification welcomed)


Qnty, Item, Part#, Interchangeable part#,
1, Throttle Cable (for Bing 54/36/102),   54.02.091.100
1, Air Filter Boot, 55.06.026.000
1, Air filter, 55.06.015.044, 02229
1, Rear Sprocket 5/8"x3/8" 57 T, 52.10.051.157, 432,
7, Clutch Disk, 54.32.011.250
8, Steel Disk (if needed with clutch), 51.32.009.100
2, Kick Starter Rubber, 20.05.018.000, 51.33.038.000
1, Rubber – shift lever, 32.03.083.000

Any help will be greatly appreciated.
Monty
[email protected]


Penton 250
Pataskala, Ohio

[Rocket]

Go the suppliers page on this site and give Larry or Al a call.  They both have great inventories.
Rocket

[Dr.2Stroke]

due to the frame # and the carb .boot spare part #,it seems to be a 78 model,because in 78 KTM changed the frame number identification for one year,as i know. the 55 means the type of the bike,in that case a 400 ccm,but the 250 had the same frame and also these 55 as first digits in the frame.check the engine number,stamped in under the cylinder at the right side,if it begins with a ..54-.... it is a 250,and if it starts with ..55,it is a 400 ccm engine.
The listed parts  are all on stock NOS,if you wouldnt find it in the states, im glad to supply them. regards Dr.2stroke
[email protected]