Seat cover 1968/1969/1970

[t20sl]

Possibly a dumb question but here goes.  What method of attaching the seat cover was used on steel tank Pentons?  Mine has 4 holes down each side but that is it.  Was there a trim molding or rivets or what?  Also what was used across the bottom of the front and back.  There were no holes for rivets or screws in these locations.  Ted

[rcrump1]

Ted;
On my 70 model steel tank 125, there are four brads down each side and I believe this is original. On the front and back the seat cover is glued to the pan.
Richard