HELP, Sachs K80 Rings

[Dwight Rudder]

HELP !  
I am looking for a set of Std. Rings for a Sachs K80 engine. I bought a new engine off ebay a year or more ago and when we put this engine in a
Hercules K50GS frame we found the engine was missing the rings. Now we are getting desperate.
HELP !
Dwight


Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.

[DKWRACER]

Maybe Jake Fisher or "Speedy"....just a thought.......

[herman]

Check with Donny hes got all of larry stuff and there is alot of sachs rings.Herm

Herm

[Dwight Rudder]

quote:Originally posted by herman

Check with Donny hes got all of larry stuff and there is alot of sachs rings.Herm

Herm

no response from either.
Dwight

Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.

[john durrill]

Dwight,
 Are both rings square or is the top a Dykes or Keystone style ring?
Martijn may be able to find some that will work. He sells lots of parts for 50 to 100cc engine's.They RR those a lot where he lives.
46 mm is the right bore size?
John D.

[OUCWBOY]

Dwight,
I am leaving in the am to start hauling parts back to CA from MO. I will check to see if Larry even had these rings. I don't have a good answer for you right now.


Donny Smith

[Dwight Rudder]

I think both rings are square. They for sure have no Dykes ring. Lee says it is a 46mm. Std. K80. I have no idea where the rings went or if they were ever installed. The engine is new and never run.
Thanks for looking Donny.
Dwight

PS: Got the side case.

Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.

[OUCWBOY]

Dwight,
Seat is on the way too!

Donny Smith