HELP: Trim strips needed for a long tall seat

[slvrbrdfxr]

Hi all,
I'm desperately needing a pair of new or like new aluminum trim strips that go along the bottom edges of a long tall seat. These are the ones that have three bolts which hold them to the pan. This is the last item I need to complete my 75 400 Mint prior to taking it to Mid Ohio. I completely overlooked buying some from Al B when I ordered all my parts for this bike a few months ago. Al B is currently out of stock and won't have any more until sometime after VMD. Does somebody out there have some they can spare ?? I'll gladly replace them once AL B has them in stock again. Any help would be greatly appreciated. Thanks !!
Dave McCullough

[Rocket]

Dave
I am almost sure, 90%, that I have a set, send me your address and I will get them headed your way.  I may not have the tiny bolts to hold them on.
Rod

[Ernie Phillips]

Dave,
I have a pair 8" long w/2 bolts (short seat?)  Let me know if these will work.

Ernie P.
Chattanooga, TN

[slvrbrdfxr]

Rod,
You have mail. Thanks !!
Dave

[slvrbrdfxr]

Ernie,
Thanks for the reply. I have a pair of the short strips to use if it comes down to the last minute and can't find the longer ones. I truly appreciate the offer though. See you at VMD
Dave McC

[454MRW]

Dave,
I'm working away from home until Thursday afternoon, but I will check my 74 HS and my 76 Cross Country to see if they have the longer strips in good codition, and let you know what I find by Friday. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S

[sixdazed]

Dave,Almost sure i have some good ones.If you still need some let me know and i'll ship them tomorrow.
                                  Ric

ric emmal

[Rocket]

Dave
The strips are in the mail.
Rod

[slvrbrdfxr]

Hi,
POGGERs are such a great bunch !! Looks like Rocket has a set of strips enroute to me and I'll be glad to get them. Thanks again Rod !! I appreciate all the offers to help so thanks to all that replied !! See everyone at VMD.
Dave McC