Carb Trade Needed

[Mick Milakovic]

Hi All,
I'm in need of a carb trade.  Ambr's Mid-Ohio bike has a 250 carb, and I need a 175 size.  Mine is in excellent condition, #54 with 54/36/123 stamped on the side.  Jet size really doesn't matter, but I'll take any suggestions you might have for pre-run sizes.  You can reply here, or call my cell phone at 765-891-1185.  Ambr and I thank you, in advance!

Mick Milakovic
2217 Witt Road
Lebanon, Indiana
46052

[Dwight Rudder]

Put a VM 32mm Mikuni on the bike.  You will never regret it.
Cher'o

Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.

[Mick Milakovic]

Thanks Dwight, is that a direct bolt-on, or will some mods be necessary?  Also, does anyone have one to trade?

[Dwight Rudder]

Exactly what are you putting it on.  Should not be a problem to adapt to most Pentons.


Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.

[Mick Milakovic]

It's a Jackpiner motor, build date of 11/72 and motor number 3-5204073.  The manifold has an OD of 1-9/16".

[Dwight Rudder]

Teddy Landers can tell you exactly what is involved.  He likes even larger carbs.  I think the 32mm will be plenty considering that the stock carb is a 30mm Bing. Eventually I will be putting a 32mm Mikuni VM on my Jackpiner.
Cher'o,

Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.