Swing arm parts/250

Started by tmc3c, November 19, 2007, 06:59:22 PM

Previous topic - Next topic

tmc3c

Does anybody have or know if Al sells part # 54.03.034.000 adjustment nut & 54.03.032.000 bearing sleeve? I don't belive these bearings have been changed since the factory did.

GREAT call on not trying this fix before New Blaine Ron!!!!



Thomas Carmichael


1970 125 Six Day
1976 250 Hare Scrambler
Thomas Carmichael


1970 125 Six Day
1976 250 Hare Scrambler

tofriedel

Thomas,

Do you need the bearing sleeve or the bearings?  If you need the bearings, you can get them from your local bearing house and are identified as an HK2030 needle bearing.

Give Al a call, he may have the parts you need, but they do not show up on his web site.

Good Luck,

Tony
Tony

tmc3c

Hi Tony!  I have the bearings, I need the bearing tube and caps on end.  I'll get in touch with Al after Thanksgiving.  Thanks for the info and I hope you and your family have a Happy Thanksgiving!



Thomas Carmichael


1970 125 Six Day
1976 250 Hare Scrambler
Thomas Carmichael


1970 125 Six Day
1976 250 Hare Scrambler

454MRW

I fear that you may have to look for a donor swingarm for the bearing tube and nuts, if yours is not salvageable. To my knowledge no one has any new ones, although Gary Ellis was attempting to make some, but ran into a problem with finding a drill bit long enough and still substantial enough to drill through the tube. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1976 Penton MC5 400
1977 KTM MC5 125
1978 KTM 78 GS6 250
L78-79 MX6 175-250 KTM\\\'s
1976-78 125-400 RM\\\'s
2007 CR125R Honda
1977 MC250 Maico
2017 KTM Freeride 250R