gs 175 exhaust flange needed

[xracer]

hey guys i am in need of a 76 thru 80 exhaust flange for a 175 it angles down slighly also one off of a 125 will fit  gary ellis is building my motor and that is the last part we need please help if you can thanks in advance  dave   when doubt gas it  734 461 9908

[xracer]

bump  come on guys dig i know someone has to have one have cash or parts to trade  thanks dave  when in doubt gas it

[john durrill]

xracer,
 I have one that's well used. The steel tube is loose in the aluminum casting.
 It will work with some high temp silicon to seal , I used it for a few months untill we switched to the 72-76 175 pipe.
 I think that this must have been common with that design. The steel sleeve had the aluminum pored around it when it was made. Over time vibration and the weight of the pipe working on it = a loose joint.
 Will that do the job for you?
 John D.
 

[thrownchain]

I'll see if I've got one. Contact you tomorrow, [ wed ].

Nope, sorry.

[john durrill]

Dave ,
 did you get the manifold ok? was it what you were looking for?
John D.

[xracer]

hey john yes i got it looks right been real busy they laid off 59 people at work and that got me effective sept 3rd who knows what this economy is going to do i sent you a email off sight hope all is well with you its people like this that make this sight great  thanks again dave  when in doubt gas it