74.5 HS Chassis

[Terence McEnally]

Need a straight frame, seat, tank, for 74.5 HS. Have wheels, forks, engine on the way. In the alternative: who can cut and paste a couple new tubes for my cradle?

[454MRW]

I have a nice painted 76 Cross Country frame that has a bent rear frame loop that would be a good donor with the stock reinforced steering head, if your frame has a nice rear frame loop. I have one but am not sure whether it is the correct bend since it is off of another version frame and looks sligtly different. Mike (in Illinois).

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
75 Can Am 175 TNT & 77 250 Black Widow
1976-78 RM & 77-79 PE Suzuki's
74 CR250M 07 CR125R & CR150R

[Larry Perkins]

I have several nice 74.5 style frames.

Larry P

[Terence McEnally]

Larry: Let me know what you have? Also need seat, tank, airbox. I bought a frame and thought it was a good deal. Turns out is had been cased hard which caused a bend/crease in the cradle tubes. I could repair (maybe) but may be better to simply find a straight one. Let me know. Thanks! TM, Raleigh NC

[Larry Perkins]

Terence,

I have a good red airbox also and I think the makings of a seat but I will need to check when I get back from Vegas this week.  E-mail me at [email protected] and when I get back Wednesday or Thursaday I will get with you on it.  Do you need just frame or frame and swingarm?

Larry P

[woodchuck]

I have a nice straight 74.5 frame with swing arm (Rear loop already repaired)for $75 plus shipping.

Chuck Purinton

[Terence McEnally]

Chuck, Larry, Michael: Possible to send or post pix? Thanks! Terence, Raleigh NC [email protected]

[woodchuck]

I'm not travelingthis week so I should be able to take/email some photos tomorrow.

Woodchuck

[woodchuck]

Terence, sorry I couldn't get out of the office long enough to get some pic of the frame today.
Tomorrow (Friday) is always crazy, but I have Saturday off and will get pictures then for sure.

Thanks,

Chuck P

[Terence McEnally]

Thanks Woodchuck. Take your time!

[454MRW]

Pics sent. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
75 Can Am 175 TNT & 77 250 Black Widow
1976-78 RM & 77-79 PE Suzuki's
74 CR250M 07 CR125R & CR150R

[Doug Bridges]

Terence
I have a 74 Mint 400 frame that is straight. Needs blasting and painting. Swing arm had crack and has been welded, bearings seem OK. also have separate 74 rear fender loop that includes upper shock mount. You can have any or all of these if you can figure out how to get them from west coast to east.

Doug Bridges
73 Jackpiner
74 Jackpiner/FrankenPenton
project
82 XR200R