Jackpiner question

Started by Randy Lamp, May 18, 2011, 10:30:13 AM

Previous topic - Next topic

Randy Lamp


Are both of the engine braces on a Jackpiner, right and left side, shaped like a hocky stick? All the photographs I have seen say they are but I have a few laying around that are straight and have some eyelets welded to them. Not sure where they came from.

Thanks

KJDonovan

Randy,

I have a 72 Jackpiner and both sides are hockey stick shaped.

KD

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Yamaha AT1 (Project)
73 Yamaha AT3 (Project)
Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner
72 Six Day
73 Hare Scrambler
74 Hare Scrambler
74 Mint

linglewn

The '73 with black engine has the hocky stick, but the '74 with silver engine has the straight brace.

Nelson Lingle
73 Jackpiner
74 Jackpiner
71 DKW 125
Nelson Lingle
73 Jackpiner
74 Jackpiner
71 DKW 125

Randy Lamp

Thank you for the reply's. I did find my parts book last night and it shows the hocky stick braces on both sides of the engine. It showed left and right hand braces. Now I have to find a couple of right side braces!

Best Regards, Randy

TedG

The straight ones are off a 250/400. I am bringing my 75 400 back from the dead and going to flat track it. So I was just looking at those braces and getting ready to replace them with nice aluminum pieces.

Gordon Brennan

Ted, If you don't mind me asking, where are you located and where will you be flat tracking?
Gordon