Unadilla roll call

[brian kirby]

I'll be there all three days. Who else is going and are you racing, spectating or swap meeting?

Brian

[chicagojerry]

i'll get there weds or thurs. i'll be there with paul/art busick. probably bo rhodes.  pretty sure todd morain coming too. guy cooper will be there, ez jim stole my ringer and put him on a bultaco.
chi jer

[Lew Mayer]

I'll be there for the CC. Plus a couple other guys with me.

Lew Mayer

[brian kirby]

Did you lay out the CC course Jerry? I'm riding the 100 in Vintage CC, and something in PV dont know what yet. I bought an '84 KTM125 from Mike Parker that needs a top end, I'm going to bring a piston kit, a gasket set, my spare cylinger/head and some numbers. If it seems OK I'll ride that for PV CC and if not, the '74.5 400 or the Maico. Not sure if I want to ride the 100 in MX, its going to depend on what the track looks like. Cant WAIT to get the '79 Maico 440 out there on Sunday though...Its nearly two weeks out still and I'm already getting pumped!!

Brian

[Dale Fisher]

I unfortunately have cancelled plans to attend.  A room (two queen beds) was reserved at the Howard Johnson's - 75 N Broad St. - Norwick, NY 13815 - about 20 minutes from the track for Friday and Saturday nights.  Total showing on my reservation was $183.60 USD.  If anyone is interested in it I can see if they will change it over to your name.  Drop me an email.

Dale Fisher
POG Memberships
74 Berkshire 100
70 Six-Days 125
73 Jackpiner 175

[dennis foley]

i will be there all three days, racing saturday and sunday. bob close should also be there. should be a super event.

[chicagojerry]

hey brian. the course should already be done by the time i get there but i'm going to look it over on thurs in case some last minute mods are in order...    chi jer

[paul a. busick]

You can count me in for the CC.  Chi Jer and I will be traveling together and perhaps with a couple of other ner do wells.
See you down Old Dusty.
Amherst Paul

[fastwillie8568]

Planning to race the cc on Friday then heading home after the PV race. fastwillie  w13 74 jackpiner

[skiracer]

Anyone coming have any interest in looking at my MC 5 tranny?  I split the cases to replace the shifting shaft, and decided to take a look at all the gears.  I was having a problem with sixth gear, so I wanted to see if anything was worn.  Anyway, I have done five trannys in the past without any problems.  I can't get this one to spin freely.  The crank will not turn completely around.  I will be there Thursday early afternoon.  If anyone has an interest, I will be displaying number L21 on my KTM and Hercules.  Thanks!

[chicagojerry]

hey ski racer. drop me a email off site. i may be able to look at at it but need more info.. [email protected]

[tooclose racing]

Ola, muchachos!  In a perfect world, I'm there all three days but my work place may say otherwise - one of our nuke unit's has not come out of refueling outage yet and I have one of those jobs where you have to drop what you doing and...

Anyway - plan to do Vint and PV XC on Friday (gosh those are close together), maybe Vint MX on Saturday and definitely PV MX on Sunday.

Bikes still need some work, as my Memorial Day weekend was spent doing final moves of homeware from This Old House to The New Ponderosa (in 85 degree conditions, thank you very much).  Thank you to Dennis Foley for loaning me his back-up Motoplat coil for my MC5. Let's hope that is sufficient to remove the Poltergiest that shut me down (twice)on the white flag laps at Cato MX.  Other than that, it is race-ready.  The Six Day needs more attention, but just due to lack of attention.  Haven't touched it yet this year.  Hopefully, no mice decided to make a home in the Circle F pipe over winter.

Looking forward to seeing (and meeting some for first time!) all of you Masters of Penton Machinery at Unadilla.  

Mr. Dale Fisher - I would love to grab that room from you.  My email at work is robert.close@cengllc. com, I don't have yours handy - wasn't sure if POG mail feature is working.  Here is personal info if hotel will take my name for now):

Bob Close
135 Chapel Road
Hannibal, NY 13074
315-349-1282 work
315-564-3036 home

Thanks!

[Ernie Phillips]

>>Thank you to Dennis Foley for loaning me his back-up Motoplat coil for my MC5. Let's hope that is sufficient to remove the Poltergiest that shut me down (twice)on the white flag laps at Cato MX.<<

Good Luck Bob!  You are going to need it.  "You don't breed race horse at the race track!"  R. Carbaugh (c 2007) to Ernie P and his broken down ol' pentons.  But hey, life is good at the "The New Ponderosa."   Congrats on the new pad and you can always fix the bike later or at the track.

Don't fear, Kirby will have plenty of tools and he will probably be using them too.

(just pokin' fun cuz I aint going to be there)

Ernie P.
Chattanooga, TN

[rd400pi]

Hey Brian,
  Please email me at seapupsan at aol.com.  I can't find your email address in my computer and want to continue the piston discussion from Meridian.  Cheers.

  Mike H.
  Tulsa

[tooclose racing]

Thanks for all of that moral support, Ernesto...would expect nothing less from you.

Hmmm...now, I wonder if they want me to sign autographs at the same tables as Smith and Wienert, or at my own tent...