Wanted: Sachs cylinder and side covers

[Marc Biro]

I'm rebuilding a Sachs motor out of a 1973 Six Days and looking for a nice cylinder, and both side covers. Covers need to say "Sachs".

Thanks

Marc

[OUCWBOY]

Marc,
I will look to see what I have this week end and will let you know!

Donny Smith
Paragould, AR

[Marc Biro]

Thanks Donny!

Marc

[OUCWBOY]

No Problem!

Donny Smith
Paragould, AR

[OUCWBOY]

Marc,
I do not have any usable cylinders that don't have broken fins. Some are cut for the steel tanker. All my clutch cover cases are cracked. I DO have a very good ignition cover, which are actually harder to find than the clutch side. Shoot me your mailing address and I will get it to you.





Donny Smith
Paragould, AR

[firstturn]

Marc,
  I think  know where there is a rod kit.  Send me a email and I will try and get the details unless you have already found one.

Ron Carbaugh

[joe novak]

Ron,  I also need a steel rod kit for a Sachs.   Are they available, and for what price?   Thanks,  joe

[Guenther68]

Hi Joe,

take one of these. They're as excellent as the F&S originals for Sachs 1251/6B with around 90 mm crankshaft (not fitting the old crankshafts with 107 mm diameter). You might have to remove a litte bit material (around 0,5 - 1 mm) from the engine housing. Otherwise the conrod could touch the housing.

http://www.ebay.de/itm/SACHS-125-2t-BIELLA-SPECIALE-ALTI-REGIMI-/290852935140?pt=Ricambi_e_Accessori_Moto&hash=item43b82f95e4#ht_1134wt_1164

I have one of these in my Hercules GS and it works great.


Best regards
Guenther Vogt,
Hercules Club, Germany



******************************
Hercules-Interessengemeinschaft e.V.
URL: http://www.herculesig.de

******************************

[johnborn]

I have a clutch cover,if you still need one.