Tires for 70 Steel Tanker

Started by Cal Alexander, January 24, 2015, 12:35:28 PM

Previous topic - Next topic

Cal Alexander

Looking for tires for my 70 Steel Tanker restoration project #V3176. I would like to stay with a period correct tread pattern. I know that many have used Chin Sheng but the 3.50 x 18's are now almost impossible to find. Any suggestions on what brand to go with? Thanks in advance for any help you can lend.

75 250 MC
73 Cafe MX
72 Six Day (3)
70 Six Day
75 MC 250
75 Mint 400
74 Jackpiner
74 Hiro
74 Penda
73 Penton Trials
72 Six Day
72 Berkshire
70 Six Day
and a few others

Richard Colahan

New 350 x 18 Barum's seem to be available here and there...and certainly are considered period correct.
Swap meets, Ebay...keep an eye out.

Perfect fit for the rear.

Richard Colahan
1969 V1225
Upper Black Eddy PA
Richard Colahan
1969 V1225
Upper Black Eddy PA

Dale Fisher

Just a word of caution on a well discussed topic.  Different manufacturers provide different actual widths for tires with the same markings.  In other words a Barum or Pirelli 3.50 width are larger usually due to the side lugs.  It's always best to identify the inflated width to avoid clearance issues.

Dale Fisher
Penton Owners Group - President/Memberships
Mudlark Registry
Facebook - Cheney Twinshock Racing Group - Administrator

'70 Six-Day 125 - V2017
'71 Six-Day 125 (Dave Fisher's) - V5553
'72 Mudlark - W257
'73 Jackpiner - 175 21159727
'74 Berkshire 100 - 40171056
'98 HP-14 Hi-Point
And some silly other bikes...
Dale Fisher

Former POG President,
Memberships, and Merchandising - Retired
Mudlark Registry

Cal Alexander

Richard, Dale, thanks for the reply. Dale, to you know if the Barum's  will  work on the tankers? Sounds like there may be a clearance issue with the chain guard. I run in to this frequently with the Metzlers I use on my CMF bikes.

75 250 MC
73 Cafe MX
72 Six Day (3)
70 Six Day
75 MC 250
75 Mint 400
74 Jackpiner
74 Hiro
74 Penda
73 Penton Trials
72 Six Day
72 Berkshire
70 Six Day
and a few others

Bill Ryburn

I have found the Duro HF355 in 4.10 X 18 to be superior to the Chin Sheng in appearance and performance. Absolutely no clearance problems on the Steeltanker chain guard. They are also easy to find.
  Bill Ryburn
  V1893

Cal Alexander

Bill, just looking at Duro tires and wanted to make sure I have the correct one your referring to. I see an HF335 in a 4.10-18. Is this the one you are referring to? All I can find on the HF355 that you mentioned is a 5.10-18 ??      Thanks

75 250 MC
73 Cafe MX
72 Six Day (3)
70 Six Day
75 MC 250
75 Mint 400
74 Jackpiner
74 Hiro
74 Penda
73 Penton Trials
72 Six Day
72 Berkshire
70 Six Day
and a few others

Bill Ryburn

Hi Cal: My mistake. The tire I was referring to is in fact the HF 335 in 4.10 X 18, not the HF 355.
   Bill