250 wiesco piston deck height

[Richard Carlson]

On my new piston it tells the ring gap but not the deck height.
In my manual for an original piston you are told to measure off the top of the L-ring (0.8mm-0.9mm) the Wiesco has square rings and a dif
ferent dimension from the top of the ring to the top of the piston.
I guess I could measure the difference and do the math. Just wondering if anyone has had a similar problem?

[G Ellis]

.053 is what I set them at. Top of the piston.

[Richard Carlson]

Thank you thats what my math came out to.