VDO mount bracket

[Scott Sappington]

Poggers, New site eh! Can some of you post or email me some photos of VDO Speedo mounts for a 74 250HS application? Or does someone have a mount they would part with? Help appreciated. I have some stainless sheet in the shop to Fab with. S Rat

[slvrbrdfxr]

Scott,
Here are two types of mounts that you could probably use. Might be others too but think the two pictured are the most common you would expect to see on a Penton. One is a metal "L-shaped" bracket that attaches to the steering stem nut using the same dynamic rubber mount found supporting the exhaust pipe. The VDO is then clamped to the "L-bracket" with a standard hose clamp. The other mount is one which attaches on the cross bar of the handlebars. Sorry but I do not have any extras to sell but hope the pictures help. I would think an "L-bracket" could be fabricated out of a good piece of stainless or carbon steel. If you need better pics and a few measurements just let me know. Good luck !
Dave McCullough