Fork seal size ??

[slvrbrdfxr]

Can someone please tell me what size fork seals are used in a 125 Steel Tank bike ?? I think the I/D is 35mm but need to confirm this and also need to know the O/D and thickness of the seals. Any help would be greatly appreciated !! Please email info to me at [email protected] . Thanks !!

 

[Doug Wilford]

Check the parts guys listed they should have your fork seals.   I have even ordered them through the local Honda shop.

 

[john durrill]

clean the old seals up . if you have very good eyes you will see 3 #'s . that is the seal size in mm. look close because sometime they are inside behind the seal lip
 I have to use a magnifying glass anymore Chuckle chuckle. Al or larry will have the seals Like Doug said.
John D.

 

[Kip Kern]

CR Seal CR13945  will do it.  4 each

 

[slvrbrdfxr]

Thanks to all for the advise on the seals !! I was able to find some seals locally using the part number supplied by Kip. Thanks again !!