cap protectors for Sachs cranks and countershaft

[Lew Mayer]

Count me in for a set.

Lew Mayer

[swamp fox]

OK John,
I'll send you info for shipping.

Robert Manucy
72 Berkshire
72 Six Day

[john durrill]

Rod, Robert, Paul, Mark, Walter
The caps are boxed and should leave in the Mail today.
Lew, deek and Ron C. I need an address . please e-mail me
John D.

[john durrill]

Folks we shiped by USPO and the shipping was $1.05 no matter where in the US on the first 5 boxes. all this run are spoken for.
Thanks ,
John D.

[firstturn]

John,
  My check will be in the mail today.  I have e-mailed my address directly to you (I didn't want Karl to know my address).  Thanks John for once again sharing your time and effort to the Penton Owners.

All Owners of Sachs engined Pentons.
  The caps we are discussing on this entry are to me basic tools(along with a flywheel puller) for maintaining a Penton bike equipped with a Sachs engine.

Ron Carbaugh

[rd400pi]

John,
  will you be making another run anytime soon?  I'd like to get a set next time.  Thanks.

  Mike Husted

[john durrill]

Mike,
 We will do another run later . It takes about 2 hours to make 1 of the small caps up from start to finish. A lot of turning and several different operation. We only have a little Smithy 1220 lathe, mill set up and are not machinist by any stretch of the imagination Will get some stock ready, cut into sections and next time I have a weekend free will do another run. Any one else that needs them let me know we will try and do enough for all that ask.
John & Peter D.

[john durrill]

Ron,
 The last of the caps should leave in the morning by USPO. The boxes are hand made and small chuckle chuckle! So if you have a normal size mail box you should see them soon. Try the small caps out as soon as you can and let me know how you like them.
John & Peter D.

[Dennis Jones]

John,

  I would like to have a set if you make more.

Dennis Jones

[jchev]

John
Please put me down for one set.  Thanks

Jeff Chevalier

[alandspeed]

Count me in if you still have any.  thanks, will email

[firstturn]

John,
  I am leaving for the Penton location tomorrow and will bring back a crank and do the fitting and get back with you.  Thanks again John.


Ron Carbaugh

[firstturn]

John,
  Recieved the caps today and will try to get to a shop this week that has a Sachs engine thatI can try them out.  They look nice and you should be proud of your work.

Regards,

Ron Carbaugh

[swamp fox]

John,
I got mine last week and had put the flywheel back on to see how they worked. The small one fits perfectly on the crank and inside the puller also. I haven't put my hands on the puller for the countershaft sprocket yet, but I'm sure it will be just fine. Cudos on your work. Thanks again.

Robert Manucy
72 Berkshire
72 Six Day

[Lew Mayer]

John, I'm in no hurry for mine,but I want to see if you got my check alright.

Lew Mayer