SACHS PARTS TO TRADE/SELL

[sixdazed]

I aqquired 3 SACHS 125 parts bikes that i have no use for.i early iron barrel bike(motor already spoken for),and 2 alloy barrel bikes- pre 73? (non slab sided tanks).If anyone needs anything let me know and i'll see if i have it.Thanks,
                             Ric

P.S.-Would,of course like to swap for Penton stuff.Note these are Sachs 125 NOT steel tanker Pentons-Thanks,i should have been more clear.
ric emmal

[pakala]

Ric,
Do you have a dent and rust free Tank? Also could use a good kickstand.
            Paul(socal)

[checkcrew]

Ric, hi, looking for the pipe guard, mine is a 71 and has the mesch material similar to the Steel Tanker, 3 small screws hold it in place, let me know, thanks, Mike G.

Mike Gallagher, Camden County, NJ. - 70 + 71, 125 Steel Tankers, 72, 73, 74, 125-6 Day's, 73 Jackpiner, 73 Yellow Tank 250 H/S

[sixdazed]

Mike and Paul,I'll sort thru this stuff today and let you know what i have.Thanks,
P.S.-I picked up the rest of this stuff from a closed down shop so i have lots of cases,cyls.,heads etc.-i'll be going thru it and picking out what i'll keep and offer up the rest.              Ric
ric emmal

[thrownchain]

If you've got one, I could use a good "full" fin cylinder for my '74 Six Days. I also need a carb for my '72 Six Days.  thx   Dan

[kaferacer]

Ric,
     I could use an uncut head and any down pipes. thanks. Kaferacer.

Hugh "Mac"Donald
(Kermac Vintage Motorcycles)

1972 Penton   125mx
1973 Monark   125mx
1972 Aspes    125mx
1971 Dalesman 125mx
1971 Sprite   125mx
1972 Tyran    125mx
1973 Premier  125mx
1974 Alouette 125mx

[sixdazed]

Paul-i have a kickstand,All the tanks i have are not perfect-the best one i have has a 50 cent piece sized ding in it and will need paint,rust wise it looks ok.Let me know if you're interested.
Mike,no gots on the pipe guard,the guy who i got this stuff from is putting a whole pipe on ebay with that kind of heat shield though so keep an eye out.
Dan and Hugh,I'll look for heads tonite and see whats there.

ric emmal

[thrownchain]

Ric, I need a cylinder, not a head. I've got a couple of full fin heads, need the cyl. thx  Dan

[sixdazed]

Dan,I know,but i was typing in a hurry and my finger and brain shorted out!I'll look tonite.Later,Ric

ric emmal

[sixdazed]

Mike,Dan,And Hugh-You have mail.

ric emmal

[BobJones]

I need a right side engine cover for my 68. The one I have had a chain go through it. I was going to weld it but it will take a lot of build up. Does anyone know if they are the same? Thanks Bob.

Bob Jones
Show-me state
(2)74 Harescramblers,72 Jackpiner,68/69 6-Day,73 Harescrambler.

[sixdazed]

Bob,I have one 4 u!
                     ric

ric emmal

[Lew Mayer]

Ric,
Do you have another rt side cover?

Lew Mayer

[sixdazed]

Guys,I've been a little slow in returning emails but i believe every request is now answered.i'll be separating the stuff and boxing it up sunday.please be specific as far as condition of item you are needing-(i.e. for restoration or rider,as new,good used,cosmetically good or not,etc.)
Thanks for your patience and as i said before i'm always up for trading as opposed to selling outright.
                                         Ric

ric emmal

[MattyQ]

Do you have any Moto Plat assemblies for a 1974 125 six day .

Matthew Quinlan