Sachs rod kits

[Marc Biro]

John,

Your down for 2.

Just need to get commitments of about 50 more kits.

Marc

[firstturn]

Marc,
  Put me down for two.  Happy Thanksgiving.

Ron Carbaugh

[VICTOR MONZ]

I can attest to the rod kits being just fine....the new "D" motor for my '08 125 cc has one and it will be put to the test this year.

I even have a couple hidden away in my "safety deposit box" !

VM

[sixdazed]

Marc-I'll need at least 2 to start with-is there a number of kits where a price break kicks in-10,12,20,25??probably 10 would have me set for life but you never know.Thanks,Ric

ric emmal

[Marc Biro]

Ric,

100 rod kits is their minimum.

marc

[Marc Biro]

Ric,

Sorry, misinterpreted what you were asking. I can appreciate your request, but at the price I would be selling them to the Poggers for, there would be no price break. The only way it could happen is if I were to place an order for 200 rod kits. Even at that it would only reduce the Poggers cost 5% to 7%.

marc

[pklinck]

Marc Biro,

In 2007, you left a message on POG about having produced some rod pins of quality?   Are you still producing A and B sachs engine rod pins?  I could use a few.
Let us know.

peter klinck

[Marc Biro]

Peter,

All the pins and rod kits are gone.

Marc

[Guenther68]

Hi all,

for all 6 speed Sachs-crankshafts we can recommend the Mazzucchelli-conrod sets from Italy with silver case bearing. Excellent quality and very low price (50 EUR). The similar conrod sets from Fu Kung, Taiwan are too soft on the pin surface and the lower bearing provides less needles than the original FAG conrod kit being produced for F&S. We've the Mazzucchelli in our internal shop for our club members.

If you want we can combine an order for you.




Best regards
Guenther Vogt,
Hercules Club, Germany



******************************
Hercules-Interessengemeinschaft e.V.
URL: http://www.herculesig.de

******************************

[Kip Kern]

Guenther,  Do you offer both the "A" and "B" Sachs rod kits?  (Same rod but different lower pins)  Can these kits be purchased by PayPal?  Thank You for the help

[rd400pi]

Poggers,
  I bought 2 rod kits from Marc Biro the last time he had them made up.  I never ended up using them and sold all of my 125cc stuff.  If anybody is interested in the rod kits, drop me a line.  Cheers.

  Mike H.
  Tulsa
  seapupsan at aol.com

  Sorry, wrong forum.[:I]

[Mickey Sergeant]

Put me down for one kit for a B motor

Mickey Sergeant

[Guenther68]

Hi all,

the conrod kits are all the same. The only difference is if it's 5 or 6 Speed crankshaft. These Italian kits fit perfect on the 6 speed.
They also fit on the 5 speed, but the lower pin is a bit to long.
After pressing of the crankshaft you'll have to shorten the pin.

If you want to order please contact me via email on herculesig[at]aol.com

Best regards
Guenther Vogt,
Hercules Club, Germany



******************************
Hercules-Interessengemeinschaft e.V.
URL: http://www.herculesig.de

******************************

[rd400pi]

Poggers,
  I am on the road with work so it will be Saturday before I can look at the rod kit boxes to see if they are for A or B motors.  If there was a choice years ago when Marc made them up, I can't remember which I got but I would assume they are for the B motor.  I'll check.  Sorry about the confusion.  Cheers.

  Mike H.
  Tulsa
  seapupsan at aol.com

[Knute]

For what it's worth, Andre Horvath has Sachs A and B rod kits listed on his site.  I've had good luck with Andre on other items in the past.

http://www.enduroklassiker.at/artikel/?mid=99&cat=11&sort=

TEAM PENTOVARNA
Kent Knudson
Kevin Brown
Gary & Toni Roach
James & Adam Giddings
Dennis & Cory Buttrick
Derick Kemper
Nicole Hays
Josh Gaitten