Sachs 100cc Piston 49 and/or 49.5mm

[Ernie Phillips]

I need a piston 49.0 and/or 49.5 mm for alloy cylinder, Mahle preferred. -EP

Ernie P.
Chattanooga, TN

[john durrill]

Ernie,
 http://cgi.ebay.com/ebaymotors/SACHS-NOS-49-5mm-Piston-Penton-Hercules-100cc-Iron_W0QQitemZ120449930641QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item1c0b601591&_trksid=p4506.c0.m245&_trkparms=65%3A1|39%3A1

john d

[Ernie Phillips]

John,  Ebay listing says for Iron Barrel.  Will this work on Alloy Barrel?  Is there any difference.  Thanks -EP

Ernie P.
Chattanooga, TN

[john durrill]

Yes , i believe so.
It does on the 125's Ernie. Ask Doug he should confirm that.
 The Rings will be like the KTM moly filled. I have an Iron Barrel piston in my 125 A engine with 200 miles on it. It did get run hard some and it is holding up well.
john d.

[Lew Mayer]

I believe I saw a box of 100cc pistons somewhere at Mid-O.

Lew Mayer

[Ernie Phillips]

Lew,

 That is not one bit .  Besides, while you were having [)] at Mid-O, I was able to source a 49mm Sachs/Mahle NOS piston from a fellow POG member[8D], who like me, decided to forgo the Grand Nationals[xx(].

Ernie P.
Chattanooga, TN

[Lew Mayer]

Ernie, I was racking my brain trying to remember who had them. I wouldn't just tease you like that. Glad you found one, though.

Lew Mayer