This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuQuotequote:Originally posted by woodchuck
No problem, it's been equally crazy around here.
I just went out in the shop and took a good look at the one I have.
It's very good except for the last 10 inches.
It's got a dent on the top in the very rear.
The diffuser tube (with the threaded rod) is broker off inside.
The two problems can be fixed at the same time, I've done it several times. What you do ist cut the end off, just beyond where the diffuser tube welds in. Then you weld in a new one, I belive Al has them new.
After that, you work out the dent, which is easy as the dented area is the part you cut off and now it's only eight inched long, open at both ends.
Once the dent is fixed, you weld that part back on and you're good to go.
These are getting hard to find, I pais about $200 for the one I bought at Mid-Ohio. I'd probably want about $100 for this one as it does need work. It will make a really nice pipe if you're willing to do, or have, the work done.
Let me know what you think.
Thanks,
Chuck Purinton
Quotequote:Originally posted by woodchuck
If you need late 175 pipe, I have one.
It needs repair to the silencer end (the tube needs to be replaced) but Al has the parts needed.
If you're interested just let me know.
Chuck Purinton
Quotequote:Originally posted by woodchuck
If you need late 175 pipe, I have one.
It needs repair to the silencer end (the tube needs to be replaced) but Al has the parts needed.
If you're interested just let me know.
Chuck Purinton