Messages

Mike,

Ordered fenders this morning from NField Gear. Should be here in FL in 3 days.

Really apreciate the info... it was spot on !

Allen

quote:Originally posted by Mike Schulz

Hi Allen and welcome to the group! We have 1970 steel tankers V2080 and V2870 and purchased our alloy fenders from N Field Gear 1405 Cannon Circle Faribault, MN 55021. Phone number 1(800)358-0938. Look them up on the web. You will need 21" x 4" universal for the front (old part number Z90605) and 18"-19" x 5" for the rear (Z90607). You will have to cut and drill them but they are very close to original. Price is around $90 a piece. Al Buehner sometimes has the front number plates. You can look him up on the home page suppliers tab. Good luck with your project and thanks for keeping your Penton in show shape! Let everyone at the show know about the POG and the new "John Penton Story" movie- it is a must see! If you haven't done so already, print out and send in the steel tanker questionaire for the steel tanker project that is also on the home page.
Mike Schulz

Thanks for the info. I have learned so much just in the last couple of days from this site. Tons of great info here !

quote:Originally posted by Daniel P. McEntee

Hi Allen;
   Now this is too cool! I really hope you can get it in the shape you need for the show. There is an identification page or two on the list but part of it doesn't work right now. Find the section on the home page for the Steel Tanker Survey, and follow the steps and photos related to that. That will help you figure out what year it is. I have my little brother's '71 100 Berkshire, and that is how I figured out fort sure what year it was. Lots of little differences in the steel tankers from '69 through '71. You'll find out that all through the entire Penton production run things changed and improvements were implemented during a production year. I'm gonna guess from your serial number it's a '70 or '71. I can't remember my brother's serial number right now. Good luck with it and thanks for the story. Hope to hear more from you. I love this kind of stuff!
  Type at you later,
  Dan McEntee

Yes I have tried Al Buehner.  He is out.
Thanks for the Info.
Regards
Allen

quote:Originally posted by Dale Fisher

There are two distinct front plates available.  The one in the above listing is plastic for the larger headlight.  Have you tried Al Buehner?  Usually when he is out of number plates he is really out [V]

Note:  Roberto extends a member discount to those who contact him via email.

Dale Fisher
Penton Owners Group - Memberships
Mudlark Registry
Facebook - Cheney Twinshock Racing Group - Administrator

'70 Six-Day 125 - V2017
'71 Six-Day 125 (Dave Fisher's) - V5553
'72 Mudlark - W257
'73 Jackpiner - 175 21159727
'74 Berkshire 100 - 40171056
And some silly other bikes...

I want to thank everyone for there help and input. I'm still trying to figure out how to reply on the forum.
Seem like there is a couple different ways. Not sure if I hit the reply to the individual post or the reply on the side?
I will attempt to answer a few questions.
I thought I read on one of the suppliers. Pentonmotorcycles.com  that there were two different headlight # plates
Available small bullet and large headlight type.  I did see the # plate on e bay but am hesitant due to not knowing if it is the correct one or not. I'm sure it will work either way.  
On the fenders. I will contact both the Royal Enfield and Nfield Gear on Monday and hopefully get them ordered.
I will let everyone know how that goes. I already contacted Royal Enfield but was unable to get through to the correct person.  Try again on Monday.

I am the Spectro Oil distributor for Florida and southern Ga. Spectro Corp in Ct asked me if I could bring a Penton to the AIM show in Orlando Fl.  They want to put it in our booth for conversation and to highlight our roots in the motorcyle industry.  Spectro is a sponsor of the John Penton movie. Spectro also made the High Point Branded oil products during the High point years. I understand that there is a sponsor of the Penton movie for the Entire AIM show and they will be showing the Penton movie non stop continous for the entire show.  This is all very exciting and I am honored that Spectro Corp wants me to bring a Penton for the booth.  I hope I don't let them down.

Now some history on this bike. Not really sure.  
My dad was a Penton dealer in Fort Lauderdale FL. The shop was a Hodaka,Penton,Husky shop called
Johns Cycle Center opened the shop in the late 60s. I pretty much grew up there. Every Sat all day every summer whenever school was out I was there.  My Dad was a Penton guy.   I remember Tom Penton staying at our house and us storing his van and bike in our garage while he was deployed.  I can remember riding enduros with my dad in what was called the buddy class.  Penton 125cc six Day. Sitting on the steel tank. Feet on the pipe and cyl head.  Holding on to the cross bar.
I have had this particular bike in my garage for at least 20 years . Not sure where my dad got it from but he picked it up along his journey. He could have sold it new and got it back. He never said and at the time I never asked. My dad John Scott has passed on now 14 years ago.
This bike may be a 1971 ? The serial # is V 6653 it's in really great shape and unrestored. Just needs a little love to get into unrestored show shape.

Thanks to everyone for the info.
Allen

Mike,
I really appreciate the detailed info on finding the fenders.
I will keep you posted on how I do.  
Regards
Allen

Thanks for the info.
Appreciated !

Mike,

Ordered fenders this morning from NField Gear. Should be here in FL in 3 days.

Really apreciate the info... it was spot on !

Allen

quote:Originally posted by Mike Schulz

Hi Allen and welcome to the group! We have 1970 steel tankers V2080 and V2870 and purchased our alloy fenders from N Field Gear 1405 Cannon Circle Faribault, MN 55021. Phone number 1(800)358-0938. Look them up on the web. You will need 21" x 4" universal for the front (old part number Z90605) and 18"-19" x 5" for the rear (Z90607). You will have to cut and drill them but they are very close to original. Price is around $90 a piece. Al Buehner sometimes has the front number plates. You can look him up on the home page suppliers tab. Good luck with your project and thanks for keeping your Penton in show shape! Let everyone at the show know about the POG and the new "John Penton Story" movie- it is a must see! If you haven't done so already, print out and send in the steel tanker questionaire for the steel tanker project that is also on the home page.
Mike Schulz

Thanks for the info. I have learned so much just in the last couple of days from this site. Tons of great info here !

quote:Originally posted by Daniel P. McEntee

Hi Allen;
   Now this is too cool! I really hope you can get it in the shape you need for the show. There is an identification page or two on the list but part of it doesn't work right now. Find the section on the home page for the Steel Tanker Survey, and follow the steps and photos related to that. That will help you figure out what year it is. I have my little brother's '71 100 Berkshire, and that is how I figured out fort sure what year it was. Lots of little differences in the steel tankers from '69 through '71. You'll find out that all through the entire Penton production run things changed and improvements were implemented during a production year. I'm gonna guess from your serial number it's a '70 or '71. I can't remember my brother's serial number right now. Good luck with it and thanks for the story. Hope to hear more from you. I love this kind of stuff!
  Type at you later,
  Dan McEntee

Yes I have tried Al Buehner.  He is out.
Thanks for the Info.
Regards
Allen

quote:Originally posted by Dale Fisher

There are two distinct front plates available.  The one in the above listing is plastic for the larger headlight.  Have you tried Al Buehner?  Usually when he is out of number plates he is really out [V]

Note:  Roberto extends a member discount to those who contact him via email.

Dale Fisher
Penton Owners Group - Memberships
Mudlark Registry
Facebook - Cheney Twinshock Racing Group - Administrator

'70 Six-Day 125 - V2017
'71 Six-Day 125 (Dave Fisher's) - V5553
'72 Mudlark - W257
'73 Jackpiner - 175 21159727
'74 Berkshire 100 - 40171056
And some silly other bikes...

I want to thank everyone for there help and input. I'm still trying to figure out how to reply on the forum.
Seem like there is a couple different ways. Not sure if I hit the reply to the individual post or the reply on the side?
I will attempt to answer a few questions.
I thought I read on one of the suppliers. Pentonmotorcycles.com  that there were two different headlight # plates
Available small bullet and large headlight type.  I did see the # plate on e bay but am hesitant due to not knowing if it is the correct one or not. I'm sure it will work either way.  
On the fenders. I will contact both the Royal Enfield and Nfield Gear on Monday and hopefully get them ordered.
I will let everyone know how that goes. I already contacted Royal Enfield but was unable to get through to the correct person.  Try again on Monday.

I am the Spectro Oil distributor for Florida and southern Ga. Spectro Corp in Ct asked me if I could bring a Penton to the AIM show in Orlando Fl.  They want to put it in our booth for conversation and to highlight our roots in the motorcyle industry.  Spectro is a sponsor of the John Penton movie. Spectro also made the High Point Branded oil products during the High point years. I understand that there is a sponsor of the Penton movie for the Entire AIM show and they will be showing the Penton movie non stop continous for the entire show.  This is all very exciting and I am honored that Spectro Corp wants me to bring a Penton for the booth.  I hope I don't let them down.

Now some history on this bike. Not really sure.  
My dad was a Penton dealer in Fort Lauderdale FL. The shop was a Hodaka,Penton,Husky shop called
Johns Cycle Center opened the shop in the late 60s. I pretty much grew up there. Every Sat all day every summer whenever school was out I was there.  My Dad was a Penton guy.   I remember Tom Penton staying at our house and us storing his van and bike in our garage while he was deployed.  I can remember riding enduros with my dad in what was called the buddy class.  Penton 125cc six Day. Sitting on the steel tank. Feet on the pipe and cyl head.  Holding on to the cross bar.
I have had this particular bike in my garage for at least 20 years . Not sure where my dad got it from but he picked it up along his journey. He could have sold it new and got it back. He never said and at the time I never asked. My dad John Scott has passed on now 14 years ago.
This bike may be a 1971 ? The serial # is V 6653 it's in really great shape and unrestored. Just needs a little love to get into unrestored show shape.

Thanks to everyone for the info.
Allen

Mike,
I really appreciate the detailed info on finding the fenders.
I will keep you posted on how I do.  
Regards
Allen

Thanks for the info.
Appreciated !

I Just received my PowerSports Business paper and it looks like
the McGraw Powersports Group is sponsoring the John Penton Story Movie and it will be running continuously during the AIM Expo show in Orlando Oct 16-18th.
 
It just so happens I will have an unrestored 1970 or 71 125cc Six Day Penton (still trying to fiqure it out) in the Spectro Oil booth for this show. Spectro Oil made the High Point branded Oil products during the High Point years. Spectro is also a sponsor of the John Penton Movie.

This is the second year for this show and there seems to be alot of excitement building as it is also Octoberfest Bike week in Daytona. There should be a lot of crossover from Daytona to Orlando.
Also the weather here is great this time of year !

Help ? Trying to get this bike ready for the AIM show Orlando in a couple of weeks.
1970 125 Penton green metal tank bike.
 I'm looking to purchase a Headlight # plate for the small bullet style headlight.
(The oval plate with cut out for smaller headlight)
Also looking for front and rear aluminum fenders.
Thanks
Allen
772-215-5448 c
[email protected]