Messages

Tank Sold.

Kevin, not sure how to find/access a PM. I sent you an email via your POG profile. Feel free to contact via my email or text to phone #.

Thx again, Chris H.

Oops, I meant 9 1/4" long.

Thx again, Chris H.

Thanks Kevin, Sure enough, the stem is exactly 9 3/4" long. I'll have to find the 10" version.

Chris H.

Oh, one more thing re my message above. As result of air box misalignment the lower mud flap that screws to bottom of the air box is way out of line and doesn't fit at all. I must have the wrong type air box for this model..??

Chris H.

Ditto "parmabike" Roberto on ebay. There are several online right now including steel oval 9" x 11", and/or notched for enduro lighting (large 130 headlight) all with rolled edge. I've purchased several from him over past 10 years and very pleased. Clean well before paint.

Chris

thrownchain, Please see your email re 32mm forks. Thx for reply.

Chris H.

Hi, I'm interested. Will you ship? Can you send pics?

Chris Heeter

Well, I answered my own question! Went ahead and painted the airbox with "Rustoleum - Maui Blue"... no primer. Came out very nice and color is, in my opinion, a closer match than Krylon Blue Ocean. Although problematic (tends to run more than Krylon, nozzle notorious for clogging, but dries faster and it looks very good, feels thicker and harder much like a nice gel-coat. A bit more glossy than my tank but won't matter since it'll be buried under the seat and behind the plates & pipe! Case Closed.

Chris H.

Thanks very much Kevin for the speedy reply! ... and for the part number. Much appreciated,

Chris H.

Not a New Member, had to create a new profile for some reason. Thanks to Admin. this site for all her assistance!!!!

Chris

1974 - 75 Jackpiner "Watermelon" gas tank. Excellent used condition. I consider it a 8.5 on a scale of 10. Original finish. Does have the usual knee rubbing marks on the decals giving it nice patina. Perfect for a Purist restoration or all original Jackpiner.
$225, Free shipping.

Text 407-718-3905 or email [email protected]
I can text pics to your mobile device.

Chris Heeter

Looking for 10" Steering Stem tube for a May '73 Jackpiner high breather.

Thanks, Chris H.

Pulled together parts to assemble my steering head, triples for 32mm Ceriani front end but the stem tube seems to be too short. After installing the races and bearings there aren't enough threads to tighten it all down, much less screw on the steering head nut. May'73 Jackpiner project. Do I need a longer stem?? What am I missing?!

Thanks in advance for any/all input,

Chris H.

I'm working on a June '73 Jackpiner and recently acquired a JP blue gel coat airbox for it. Couple questions about this box - First, it doesn't seem to fit the frame quite right. The lower left mounting hole (filter side) lines up fine but not flush with the frame so the mounting screw is exposed behind it by almost an inch. The top mount under seat area appears to be spot on. But, the right (pipe) side hole is off by almost an inch. Seems that if I could get the left side to mount flush, as it swings into place the right (pipe) side hole would have a better chance at lining up.... but the frame just keeps getting in the way from every angle. Is this common or do I have the wrong size box?  In addition, I read a different post a few days back (can't find it now) that indicated there were 2 different High Breather boxes made depending on model and/or year? My box has the intake modification on top that's not covered with gel-coat and it looks like a rush job by manufacturer (had to beef it up with a couple little stainless brackets). In addition, I stumbled on a couple posts here regarding said mods with reference to 2 different sized intake triangles. Have also noted at least 2 different sized triangular metal lids re the same on ebay or POG site over the years lending credence to this. What do I have here? I'd hate to have to swap out this box as it's in very good condition. Any and all input would be much appreciated. (Sorry for being so long winded)

Chris H.