KTM seat stencil

[Toolsurfer]

Got mine today Cal! Sweet , just what I needed to finish that seat. Do you have suggestion for paint type and producer. Thanks William

[Cal Alexander]

William, see my comments above on paint for stencils. The original CMF bikes used a silver paint on the seat logo. Alum-blast works great for silver. I believe the bikes 1974 and later were white. If you prefer a white logo a white semi-gloss spray works good. Be sure to do several light coats to avoid bleeds and drips. Give it a few minutes of dry time between coats.

[Toolsurfer]

Thanks for the info and will follow your advice. William

[clayman]

Hi Cal,

Not sure if you have received my emails or not? I am not getting emails through POG site since that's an old email address. Still need the stencil. Can you post your mailing address?

Clay

[Cal Alexander]

Sorry Clay, I didn't receive your email, here's my email address again. [email protected] Its hard to read the address when I post it as the web site adds a full underline under the address. There is a _ (underscore) between my first and last name on my email address. If that fails try sending an email through the POG web site, I usually get those. I have saved a seat stencil for you. I believe you needed the KTM with the small Penton underneath. I am now completely out of other type but still have a couple of the KTM style.  - Cal