KTM seat stencil

[clayman]

Many, many years ago I had a KTM seat stencil to paint a logo on my steel tanker. Since then I've moved three times and have no idea where it could be. Are these still available? Was it Al Buehner that sold them in early 2000s?
Thanks,
Clay

[454MRW]

I believe I received one from Randy Kirkbride, but I believe he sold off all of his decals and may have sold those stencils at that time. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1978-1979 MX-6 175 & 250 KTM's
1976-78 125-400 RM's & 79 PE250 Suzuki & 2012 DR650
2007 CR125R Honda
1977 MC250 Maico

[clayman]

Hi Mike,

Oh, that's right, it was Randy. Thanks for remembering that. I may try to make one myself. Hope all is well with you.

Clay

1974 CZ 250
1974 CZ 400
1974.5 Penton 250
1981 Yamaha YZ 250

[Dale Fisher]

Randy offered both a KTM and KTM Penton stencils.  I'm thinking he sent me and still have a plain KTM if you need it for a template.



Dale Fisher
Penton Owners Group - President/Memberships
POG Merchandise
Mudlark Registry
Facebook - Penton Owners Group - Administrator
Facebook - Cheney Racing Group - Administrator

[clayman]

Hi Dale,
That would be great if you could send it to me. I had the "KTM Penton" stencil somewhere, but who knows where it is now. A plain "KTM" would be fantastic since that's what's on the back of the old cover anyway. Greatly appreciated!
Clay

[Cal Alexander]

I have a few KTM seat stencils remaining that Randy Kirkbride had sent me from the last of his sticker stash. The KTM version has the small Penton under a larger KTM logo. The other version has the Penton logo on top with a smaller KTM underneath. Clay I can email you a photo of what I have if that helps, let me know. Sorry I haven't figured out how to post pictures from my Mac on the POG web site.    - Cal

[Toolsurfer]

I would be interested in one of those stencils if you have extra's. Penton on top would be preferred. William

[clayman]

Hi Cal,

That sounds great if you have a spare to sell. I'd love to have either one. Please reply to this posting with your address if you can and let me know how much to send you. LG is sending me a seat cover here shortly any day:),
Thanks,
Clay

[Cal Alexander]

I have what you requested, Just sent emails through the POG to William and Clay.

[242]

I have never tryed using the seat stencils. How do they work? I'm in need of 10 or so. I need a big Penton over KTM and Penton only for another project. Dave

[rob w]

apply four light coats, I use fabric and vinyl paint, if you coat it too heavy the paint will become one with the stencil and will all come off together when removing stencil

[Cal Alexander]

Seat Stencils can be reused if your careful and doing more than one seat at a time. I only have a couple of stencils left so I can only provide one per request. Need to have some more made up. For the CMF bikes, the original seats had Penton stenciled in silver. Randy Kirkbride pointed this out to me a while ago and sure enough I checked an original six-day seat and it was done in Silver. I've used silver alumni-blast paint that's used on engine cases and it works great. Do several very light coats with a little drying time between coats to avoid bleeds and drips. You can also use regular white spray paint if you like that look better.

[clayman]

Hi Cal,

How can I contact you? This site has my old email address as a way to contact  me, so I'm not getting emails and I want to get a seat stencil from you before they are gone.

Thanks much,
Clay

[skiracer]

Hey Carl, do you have any more with the Penton on top? Thanks, James  jameslubniewski@hotmail

1976 MC 5 Original Owner
1976 Penton 175 XC
1985 20' Hi Point trailer

[Cal Alexander]

Clay, email me at [email protected]