Speedo drive

Started by thrownchain, August 03, 2009, 06:35:53 PM

Previous topic - Next topic

thrownchain

Speedo drive off a '73 to '75 front wheel, with good drive ring. 250 I believe, Magnesium hub. VDO and 2100000/ 58/1 on the housing. No idea what it's worth. Taking offers. I dis-assembled, cleaned, lubed and re-assembled it. Works smoothly. Also have complete axle assembly out of same hub if any interest.  Thx

thrownchain

I still have the speedo drive unit, E bay didn't pan out. I also have 2 complete assemblies for the front hub internal parts. This includes the hollow shaft, snap rings, spacers, grease cups, and bearings. The bearings are used, but don't feel too bad.
Also I have a couple of 21" rims, one is a Sun rim, well used, but no noticable flat spots, slightly out of round, but couldn't really say how bad, as the hub was broke. Second is an Akront flanged rim, again used, but doesn't look to be in bad shape, could use a good cleaning, again the hub was broke. I also have spokes for both rims, although the spoke nipples should be replaced.
Anyone with a need for any of this stuff???