Penton and misc,parts

Started by fischercycle, March 13, 2002, 11:49:32 AM

Previous topic - Next topic

fischercycle

LOTS OF NEW SPROCKETS FOR LATER MDL. 76 TO WHAT EVER 428 CHAIN TYPE,, SIDE PANELS FOR SAME YEARS,  NEW FRONT WHEELES FOR 125CC 175CC, CHAIN GAURDS BLACK ,AIR BOOTS ,FORK PARTS,COUNTER SPOCKETS,GAS CAPS, HAND LEVERS,FRAMES,CABLES, GASKETS ,LOTS OF SMALL ENGINE PARTS, ENGINE BLOCKS 125 TO 400 all new oem parts   [email protected] or call 412 781 6309  724 586 7383 Jake

 

Bryan

I've got two bikes that I am looking for parts to restore them here is what I'm looking for. Clutch side crankcase for a '76 250cc Penton/KTM. The other bike I have is a '78 400cc KTM and I am looking for side panels for it both bikes are motocross. Do you all have these parts and how much are they? Thanks.

Bryan
Bryan

tmc3c

I've tried several times to reach you without much sucess.You must be a busy man.How about a fork slider leg for my 76 250 marzocchi w/leading front axle. I need the side with the 2 allen bolt's.How much? by chance do you have fiberglass air box cover?

Thomas Carmichael
Thomas Carmichael


1970 125 Six Day
1976 250 Hare Scrambler

tmc3c

Bryan  H&H ktm in Douglasville G.A. has plastic side cover's for your bike's . If I cant find a fiberglass airbox cover that's what I am going to do.Call Barry Higgins there at[770]920-1371

Thomas Carmichael
Thomas Carmichael


1970 125 Six Day
1976 250 Hare Scrambler

fzrr750

Jake, got any white rear fenders that will work on my 79 KTM 250MX? Know of a universal one that will work on this narrow frame and seat? I have been looking for over 3 months for a rear fender. I bought an Acerbis universal front and it fits like it was ment to be on it.
 I do not want the one with the number plates build in. Just the short MX type!! Used would be fine if it looks new!!  

 Thanks for your time.   Ed T.

 
71 Suzuki TM400,76 Suzuki RM250,74 Yamaha MX360,79 KTM 250MX,89 KTM 250EXC, 87 Yamaha FZRR750 X-endurance racer #112.

tmc3c

Thanks for the call jake!The fork's are gray, one side dosen't have any allen hd. bolt's only the axle nut. the other side has 2 small allen's holding the axle. I would guess as a backup. I work 3rd shift and I'll try and catch you mon. I also will have the fork tube size for you.Thank's again.

Thomas Carmichael
Thomas Carmichael


1970 125 Six Day
1976 250 Hare Scrambler

Dr.2Stroke

i have a new and about 10 used left side crank case clutch covers,and new original airbox side covers for the 76 250. Dr.2stroke