Clarke Plastic Fuel Tanks

[KJDonovan]

Greetings,

I came across an ebay ad for Clarke aftermarket plastic fuel tanks and noticed that they have tanks for 75 to 77 MC5's.  In looking at the tank it the shape and size looks a lot like the old Hi-Point alloy tanks.  Does anyone know how / if one of these would fit on a 72 Six Day?  I would like to find something I don't need to drain after every ride.

Thanks,

KD


Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Yamaha AT1 (Project)
73 Yamaha AT3 (Project)

[Larry Perkins]

Those Clarke tanks only fit the MC5 frame to the best of my knowledge.  Windsor made one that fit the Highbreathers in the enduro watermelon style.

Larry P

[KJDonovan]

Thanks Larry.

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Yamaha AT1 (Project)
73 Yamaha AT3 (Project)

[tanz]

Kevin,  I have one if you want to try and make it fit.

Steve

[Britt Boyette]

Larry is correct, that Clarke tank only fits the MC5.

Britt Boyette

76 400 MC5 (project)
77 Husky WR250
76 RM370
83 YZ250
06 KX450f flat tracker
09 Kawasaki Versys
70 Suzuki TS250
Too much of a good thing? I think NOT!

[Kip Kern]

Kevin

I have been running an orange Clarke "Toaster" tank on my frame breather "76" GS 400 for about 2 years now and it fits fantastic.  Have Clarke send underside photos of both tanks they offer and if the same, it will work OK.  So far, awesome performance from their products!

[Larry Perkins]

Kip,

The Clarke Toaster and MC5 tank are for sure different as the toaster was designed for the big backbone of the GS and the MC one for the smaller triangle build of the MC5.

Larry P

[KJDonovan]

Thanks Kip,

I'll see if I can get Clarke to send me some photos with the dimensions of the tunnel on the tank.

KD

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Yamaha AT1 (Project)
73 Yamaha AT3 (Project)

[tacrac]

Hey Kev,

You gave me a Six Day frame a few years ago. Thanks again

I have a new clark tank I would give to you if you come get it or cover shipping.

let me know
Ron
[email protected]

[KJDonovan]

Ron,

Thanks so much.  Just sent you an email.

Thanks,

KD

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Yamaha AT1 (Project)
73 Yamaha AT3 (Project)

[JCHubbard]

I want to preserve my original tank for a 1977 Penton 250 GS6 and have been thinking about using a Clarke Tank and have been wondering if the tank below would fit. I will be racing this bike this season.

click here:
http://www.clarkemfg.com/cart/index.php?main_page=product_info&cPath=14&products_id=220

Thanks,

John Hubbard

[G Ellis]

John are you looking for a large tank,or a small tank for your GS6? I have a couple of extra large tanks. Give me a call 217 260 0237  Later Gary

[454MRW]

Clark makes a GS-6 tanks. Dave McCullough has one on one of his bikes. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
75 Can Am 175 TNT & 77 250 Black Widow
1976-78 RM & 77-79 PE Suzuki's
74 CR250M 07 CR125R & CR150R

[slvrbrdfxr]

Yes, Mike Winter is correct. I wanted to preserve the original fiberglass tanks and installed the Clarke gas tanks on both of the 77 250GS6 bikes that my brother and I rode in the ISDT RR. I coated the inside with Caswells sealant on both before putting any fuel in them so the decals wouldn't peel off. The petcocks and petcock grommets can be purchased from Wicks Aircraft Supply for a very reasonable price. So far they have worked great.Hope this helps.
Dave McCullough

[JCHubbard]

Dave,

Did you use the tank that in the link that I posted?

John Hubbard