Penton/ KTM 125 f/s

[thrownchain]

Due to recent events, I've decided to thin the herd slightly.
Up for sale I beleive it's a 1976 125, KTM motored Penton. Reasonably complete, I did buy a Dennis Jones motor to replace the one I got with the bike, as it was pretty shot. The rest of the bike is there but rough, you will probably have to buy a carb, the one I got with the bike almost falls into the intake rubber for the Jones motor. I did have this bike at the 40th, I can send pics to those that are interested. I may be able to deliver on the east coast, Mid Ohio, or possibly out I 70 to Kansas. I've got about $800 invested, would like to break even if possible.

[Greg Elliott]

Hello,can you send me photos of 76. Send to     [email protected] thanks. Greg e

[Jeff D]

Dang, you would have to add that you might be coming to Kansas via I-70.  Shoot me some pix please.  jeffdebell at aol dot com

Jeff DeBell

[thrownchain]

Pics have been sent

[thrownchain]

No takers?

[454MRW]

Here are pics of the bike Dan has for sale. Mike

[thrownchain]

Nobody needs a project?  It's not as bad as it looks, and the motor is alrady done.

[thrownchain]

Last call, I can still load it up and bring it with me to M/O

[thrownchain]

This bike is still up for sale, can haul to the April meeting if anyone is interested.

[454MRW]

Dan,
If you wind up having to part it out, I would be interested in the forks if there are no pits in the travel area. I need a set of 35 Ceriani's for a 75 racer. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

[tofriedel]

Dan,

What are you asking for the bike?

Tony

[thrownchain]

Asking $1000, will deal for cash, seat has already been recovered by Gary Ellis.

[thrownchain]

Mike, I wont part it out, but if you to buy it and part it out, feel free to contact me. Motor is a Dennis Jones racing motor.

[454MRW]

I really try hard to resist parting out bikes myself. I usually do the opposite and build them from parts left over. Just checking in case you needed, or were hurting for some cash right away. I can't afford any major things until tax refund comes in, and my other obligations are met. Not to mention I need to lose a lot of weight to ride a 125. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

[thrownchain]

still for sale, can haul to the April meeting if anyone is interested.