Ceriani Leading-Axle

[Terence McEnally]

I bought some Ceriani leading-axle forks from a member about a year ago. Turns out the axle pinches were cracked through. Anyone got a pair of these they'd let go? Just need the lowers (sliders) but I'll buy the whole front end if need be. I guess they're 35mm. Terence (919) 819-4950

"Illegitimi Non Corborundum"

[454MRW]

The Ceriani leading axle forks are somewhat rare and only used in 76 on Pentons, but you can have them Magnesium welded by a competent welding shop that can weld Magnesium. Gary Ellis has done some for several POG members in the past including me, with good results. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

[Terence McEnally]

Winter: Thanks much. Contact info for this fella? I am at [email protected] (919) 819-4950

"Illegitimi Non Corborundum"

[rob w]

Remember, if you find a set (or a leg) that came off of a Hercules, they are cast opposite of the Penton/KTM models. The threaded boss that the brake anchor bolts to, is on the opposite side.

Bob W

[454MRW]

Terence,
I sent you an email with Garys info. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R