Cure for 'da low bar blues?

[wfopete]

Don't know how many of you are using these Rox Risers but this is a great way to achieve a taller bar and get a ton of adjustment for ergos.  They are made in various heights and diameters as well as rubber mounted & these are probably EZer to swap out between bikes than handlebars. They range for around $80-$120.

I know they are not "Old School" but...



Check 'em out here:

http://www.roxspeedfx.com/cgi-bin/cart/showitems.cgi?multicatlabel_id=79&multicatsublabel_id=324

Pete Petrick
175 Jackpiner
Slow but Good

[454MRW]

Bob Wardlow had fabricated some a while back a well. By the way, since Bob didn't make it to Mid-Ohio, I am wondering how he is doing if anyone knows? Mike.

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R