1974 125 Six Days Seat Interchange

[Darvin Jahnke]

I have a 1974 125 Six Days that is missing the seat. Are there other models or years of seats or seat pans that will interchange? I warned you guys that I would have a lot of questions and now that I have a project I'll probably be asking a lot. Thanks for any help.

[gooddirt]

All the CMF frames  will use any of CMF bases ,you might have to flip over the rear brackets of the 250 or 400 bases to go on your 125 a bit easier .( or maybe its the other way around on the flipping)

[imported_n/a]

Darvin, I have a '75 "long/tall" seat on my '74 Six Day which originally came to me with a "short/tall" seat. The 1975 long/tall "GP" seat has an aluminum base and didn't require any adjustment on the brackets to fit the CMF frame. Make sure to test fit a new rear fender (if applicable) with seats bolted in place. I learned this the hard way with an earlier installation and a Falk enduro fender![:0]

Good Luck - Have Fun!!

[Darvin Jahnke]

Thanks for the tips guys.

[gooddirt]

Ok you flip the 125 brackets on the 125 bases to fit EASIER on the 250 400 frame