WTB LH Engine Stay / 75 Penton 400

[KJDonovan]

Looking for a left side engine stay for a 75 Penton 400.  PN:54-03-045-200  Measures 190MM eye to eye.  Al B is out and none on ebay.

Thanks,

Kevin

[fischercycle]

HELLO MR. K  DONOVEN HOW MANY OF THESE ENGINE BRACES DO YOU NEED; I WILL BE AT THE WAREHOUSE SUNDAY TO CHECK . I KNOW I HAVE A HUNDRED OR SO OF THIS TYPE BRACE? IS THIS THE ONE THAT HAS THE CURVE ON IT.,LET US KNOW HOW THE STAND WORKS OUT ,SENT IT MONDAY YOU  SHOULD HAVE IT BY THE WEEK END GLAD TO HELP YOU OUT. JAKE

[KJDonovan]

Jake,

The center stand for the 75 Penton 400, fits perfectly!  Thanks so much for your help with this.  If you come across the engine stay let me know.

Thanks Again,

Kevin

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Suzuki TS125
72 Montesa Cota 123
72 Montesa Cota 123T (Another Project)

[454MRW]

Are you needing the aluminum girder style with the clevis end that attaches to the case boss, the slightly longer aluminum girder style that attaches to the stud, or the stamped steel with the loop for the vent hose? Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

[KJDonovan]

Mike,

I am looking for the aluminum girder that attaches to the case boss.  Eye to eye it should measure about 7-7/16" (190MM).

Thanks,

Kevin

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Suzuki TS125
72 Montesa Cota 123
72 Montesa Cota 123T (Another Project)

[454MRW]

I'm down to my last one and need that particular one for a bike I'm working on, but there is a pair of  braces on ebay under 1975 KTM 250 motor mounts for $29.97 plus $8 shipping Buy it Now. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

[KJDonovan]

Mike,

Thanks for the lead. I snagged them.  I didn't even realize that bracket had a clevis end, all the ones I have seen were just the flat bracket.

Thanks,

Kevin

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Suzuki TS125
72 Montesa Cota 123
72 Montesa Cota 123T (Another Project)

[fischercycle]

HELLO, MR. DONOVAN AS I LOOKED THROUGH MY MANS CAVE I ONLY FOUND 35 OF THE 190MM ENGINE BRACES  WITH ONE TAPER HOLE  ,I EVEN HAVE THE TAPER NUT TO GO WITH IT ,WILL SEND OUT TUESDAY NO MAIL TODAY,I WILL BE LISTING ALL THE BRACES ON EBAY TUESDAY ABOUT 200 OF THEM  SO IF YOU GUYS NEED THEM KEEP LOOKING AT  THE PILE OF THEM AND LET ME KNOW WHAT YOU NEED,AL.B  HAS NOT FOUND THEM YET HERE,   OK JAKE